PDA

View Full Version : Help! Help with G3 calibration


heliboy88
Jan 20, 2007, 09:11 PM
Hi guys, i got a 2nd hand G3 sim(just the cds and the 'dongle') but can't calibrate the cantroller, maybe someone can give me some advices, here are my problems(questions):
-how many circles should i turn with the two sticks?
-what should i see in order to stop turning the sticks?
-do i have to hold the positions of the sticks if i see mostly 100% on the bars and hit the 'finish' button or just release the sticks or just put back to center positions before hitting the 'finish' button?
-i don't seem to see the elevator channel in the 'channel map'
And here's what i did: i just turn the sticks in circles and if i find almost all 4 bars are close(some are not 100%) to 100%, i hold the sticks in that positions and hit the 'finish' button.
-and for channel mapping, i just reverse those that seem not right to me(but just can't find the elevator channel),
-try to fly it but its really not flyable, the heli will just lift a little bit but it seems just like to have the "elevator" pushed down and the nose will just point to the floor and crash, i just pull back the elevator stick but nothing's changed.

I just really can't fly the sim, can anyone pls help me out with this mess?
Thanks in advance guys!

-regards,
rich