Request: Battery Switches w/charge jack

[Doubletap]

I see you're carrying lots of servo leads and Y-connectors. I'd like to see battery switch harnesses w/charging jack, as these are typically expensive but necessary items for each model.

Do you have any plans to carry them?

Doubletap

[DR. JOY]

That is a good idea. I was needing one of these yesterday. They are rather expensive elsewhere.

[XJet]

The best ones are those which have a charging jack that is built into the switch itself (so that you don't need a stray lead hanging out of your plane -- you just plug your charge lead in beside the switch itself).

I use these exclusively now and they're just so much more convenient and simple to use.

One thing though -- I'd want heavy duty wires (no thinner than 22ga) because I use heavy-drain servos and many of my models are at least 90-sized and over. The little 26ga extensions and switch harnesses are no good to me.

[Doubletap]

I would be great if they started carrying the full size harnesses w/charge jack and 22g wire, AND the micro style switches with 26g wire for the smaller park flyer type planes and sailplanes.

Doubletap