DannyR
Jan 03, 2007, 12:16 AM
I built a transmitter tray out of the following items:
1. Plastic clipboard (1)
2. 6 inches long by 1/4 inch diameter eye bolts (2)
3. ~3/4 steel/Al washers (4)
4. ~1/2 inch nylon washers (4)
5. 1/4 inch inside diameter clear plastic flexible tubing (2 feet)
6. Plastic adhesive backed wire hangers (2)
7. Shoulder strap from my old briefcase
I made this in about an hour and a half. Construction is very simple and it cost me about $5.00.
1. Plastic clipboard (1)
2. 6 inches long by 1/4 inch diameter eye bolts (2)
3. ~3/4 steel/Al washers (4)
4. ~1/2 inch nylon washers (4)
5. 1/4 inch inside diameter clear plastic flexible tubing (2 feet)
6. Plastic adhesive backed wire hangers (2)
7. Shoulder strap from my old briefcase
I made this in about an hour and a half. Construction is very simple and it cost me about $5.00.