GPM Knuckles & Integy Arms on Savage?

[Bob]

Does anyone know if these parts are compatible? Will the GPM Parts fit
the Integy arms?

GPM Knuckles
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649

Integy Arms
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436


Thanks,

[Iridium]

"Bob" <reply@news.group.no.email.address.thanks.com> wrote in message
news:elgdp21o574orebi3gvnihq5j1p48rbm5s@4ax.com...
> Does anyone know if these parts are compatible? Will the GPM Parts fit
> the Integy arms?
>
> GPM Knuckles
> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649
>
> Integy Arms
> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436
>
>
> Thanks,
>

Well, yes, they will fit, but don't. The stock parts are frankly, better.

--
Dan
Formerly DanTXD

[\Doc\]

"Iridium" <iridiumdan@googlemail.com> wrote in message
news:4voh1lF1c2ejoU1@mid.individual.net...
> "Bob" <reply@news.group.no.email.address.thanks.com> wrote in message
> news:elgdp21o574orebi3gvnihq5j1p48rbm5s@4ax.com...
>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>> the Integy arms?
>>
>> GPM Knuckles
>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649
>>
>> Integy Arms
>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436
>>
>>
>> Thanks,
>>
>
> Well, yes, they will fit, but don't. The stock parts are frankly, better.
>
> --
> Dan
> Formerly DanTXD

I would strongly disagree! The most common parts I used to break on my
Savage were the front a-arms and knuckles/uprights until I replaced the arms
with Golden Horizons alu ones and the knuckles/uprights with GPM alu ones.
Haven't broken a thing since then!

Doc

[Bob]

Thanks for your replies Iridium & Doc, I did buy them now waiting for
the delivery. I was sick of breaking the plastic ones.


On Sun, 31 Dec 2006 15:36:21 -0500, "\"Doc\"" <hmmmm@nahhhh.net>
wrote:

>
>"Iridium" <iridiumdan@googlemail.com> wrote in message
>news:4voh1lF1c2ejoU1@mid.individual.net...
>> "Bob" <reply@news.group.no.email.address.thanks.com> wrote in message
>> news:elgdp21o574orebi3gvnihq5j1p48rbm5s@4ax.com...
>>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>>> the Integy arms?
>>>
>>> GPM Knuckles
>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649
>>>
>>> Integy Arms
>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436
>>>
>>>
>>> Thanks,
>>>
>>
>> Well, yes, they will fit, but don't. The stock parts are frankly, better.
>>
>> --
>> Dan
>> Formerly DanTXD
>
>I would strongly disagree! The most common parts I used to break on my
>Savage were the front a-arms and knuckles/uprights until I replaced the arms
>with Golden Horizons alu ones and the knuckles/uprights with GPM alu ones.
>Haven't broken a thing since then!
>
>Doc
>

[\Doc\]

"Bob" <reply@news.group.no.email.address.thanks.com> wrote in message
news:49ctq2loied83l6oqhe70jb89hn812455u@4ax.com...
> Thanks for your replies Iridium & Doc, I did buy them now waiting for
> the delivery. I was sick of breaking the plastic ones.

I popped about 2 a-arms and 3 uprights before I tossed alu at them. Haven't
broken one since! The GPM uprights have a REAL tight fit on the suspension
pins. If you find that the pin will not go thru the upright, use a dremmel
and lightly sand the pin until it slides in easily. The Golden Horizon's
arms on the other hand were a perfect fit.

pics here: www.danontherun.com/doc

Doc

////////////////////////////////////
>
>
> On Sun, 31 Dec 2006 15:36:21 -0500, "\"Doc\"" <hmmmm@nahhhh.net>
> wrote:
>
>>
>>"Iridium" <iridiumdan@googlemail.com> wrote in message
>>news:4voh1lF1c2ejoU1@mid.individual.net...
>>> "Bob" <reply@news.group.no.email.address.thanks.com> wrote in message
>>> news:elgdp21o574orebi3gvnihq5j1p48rbm5s@4ax.com...
>>>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>>>> the Integy arms?
>>>>
>>>> GPM Knuckles
>>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649
>>>>
>>>> Integy Arms
>>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
>>>> http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436
>>>>
>>>>
>>>> Thanks,
>>>>
>>>
>>> Well, yes, they will fit, but don't. The stock parts are frankly,
>>> better.
>>>
>>> --
>>> Dan
>>> Formerly DanTXD
>>
>>I would strongly disagree! The most common parts I used to break on my
>>Savage were the front a-arms and knuckles/uprights until I replaced the
>>arms
>>with Golden Horizons alu ones and the knuckles/uprights with GPM alu ones.
>>Haven't broken a thing since then!
>>
>>Doc
>>
>