ShokWaveRider
Dec 24, 2006, 11:08 AM
Stealth LED Boost Gauge KIT. Install this great mod in your VW or Audi Tach on Your car's OEM MAP Sensor for 0 - 20 psi. Or you can have 0 - ??Psi, by using an external instrument grade MAP sensor. Boost is represented by 20 LED indicators that are easily viewed during bright daylight. An automatic dimmer feature is also included for pleasant night time operation.
The Boost Control Unit is fully assembled and can be calibrated for the OEM MAP Sensors of VW Golf, Passat, TDI or Jetter and Audi S4, A4 1.8T, S6 etc.
The unit can be adapted to ANY Turbo or Supercharges Car with the use of an Optional Instrument Grade MAP Sensor than enables 20, 25 or 30 psi maximums on any Turbo vehicle. In addition this custom unit can be calibrated to begin and end at any desired range, a popular example is 6psi start up to 25psi. This is an assembled kit only, so you will have to provide a few readily available parts like Solder, Soldering Iron Misc. Wire Etc.
Simply select a location for the 20 LED Indicators, wire them to the pre-built and calibratede Boost Controller and you have your own unique Stealth Boost Gauge.
This unit is NOT mass produced or commercial in any way. Each controller is custom assembled and calibrated. It was originally designed for Audi S4 Track Race Cars and adapted to other cars as the requests came in.
Please see the following site for more info.
Stealth Boost Gauge (http://www.impconcepts.com/genericbarebonesiboostgaugeforsale.htm)
Optional Instrument Grade MAP sensors and higher PSI ratings available on request. IMP Concepts (www.impconcepts.com)
Email IMP Concepts (info1@impconcepts.com) for more details.
Trades for RC equipmentm Models etc. Welcome.
SWR
The Boost Control Unit is fully assembled and can be calibrated for the OEM MAP Sensors of VW Golf, Passat, TDI or Jetter and Audi S4, A4 1.8T, S6 etc.
The unit can be adapted to ANY Turbo or Supercharges Car with the use of an Optional Instrument Grade MAP Sensor than enables 20, 25 or 30 psi maximums on any Turbo vehicle. In addition this custom unit can be calibrated to begin and end at any desired range, a popular example is 6psi start up to 25psi. This is an assembled kit only, so you will have to provide a few readily available parts like Solder, Soldering Iron Misc. Wire Etc.
Simply select a location for the 20 LED Indicators, wire them to the pre-built and calibratede Boost Controller and you have your own unique Stealth Boost Gauge.
This unit is NOT mass produced or commercial in any way. Each controller is custom assembled and calibrated. It was originally designed for Audi S4 Track Race Cars and adapted to other cars as the requests came in.
Please see the following site for more info.
Stealth Boost Gauge (http://www.impconcepts.com/genericbarebonesiboostgaugeforsale.htm)
Optional Instrument Grade MAP sensors and higher PSI ratings available on request. IMP Concepts (www.impconcepts.com)
Email IMP Concepts (info1@impconcepts.com) for more details.
Trades for RC equipmentm Models etc. Welcome.
SWR