Stall Speed Indicator Feature from Eagle Tree Systems, LLC

[billpa]

Why risk your multi-thousand investment on a bad landing?

Eagle Tree Systems is pleased to announce the release of the variable beep rate Stall Speed indicator feature for our Seagull Pro telemetry systems. This feature is ideal for jets and other planes that are stall-prone during landing.

http://eagletreesystems.com/UAV/images/Dashboard-Pro.jpg

To use the Stall Speed feature, just install our latest software from the support page of our website, read the instructions on setting stall speed, configure the stall speed trigger, and you are ready to go! Once configured, the Seagull Wireless Dashboard will begin a slow beep when the trigger speed is reached, and will begin beeping more rapidly as your speed decreases, helping you to maintain correct speed during landing.

If you don't yet have our Seagull Pro telemetry system, see your dealer, or order directly from us if there is not a dealer near you. We now have support for wireless display and alarms for key Jet ECU parameters from JetCat, AMT and Fadec based turbines!
http://eagletreesystems.com/UAV/images/Pro-fingers-small.jpg

And as always, phone and email Technical Support from Eagle Tree is free and unlimited.

See your Dealer, visit our site at http://www.eagletreesystems.com or email sales@eagletreesystems.com for more information.

[E_ferret]

Why risk your multi-thousand investment on a bad landing?

Eagle Tree Systems is pleased to announce the release of the variable beep rate Stall Speed indicator feature for our Seagull Pro telemetry systems. This feature is ideal for jets and other planes that are stall-prone during landing.

http://eagletreesystems.com/UAV/images/Dashboard-Pro.jpg

To use the Stall Speed feature, just install our latest software from the support page of our website, read the instructions on setting stall speed, configure the stall speed trigger, and you are ready to go! Once configured, the Seagull Wireless Dashboard will begin a slow beep when the trigger speed is reached, and will begin beeping more rapidly as your speed decreases, helping you to maintain correct speed during landing.

If you don't yet have our Seagull Pro telemetry system, see your dealer, or order directly from us if there is not a dealer near you. We now have support for wireless display and alarms for key Jet ECU parameters from JetCat, AMT and Fadec based turbines!
http://eagletreesystems.com/UAV/images/Pro-fingers-small.jpg

And as always, phone and email Technical Support from Eagle Tree is free and unlimited.

See your Dealer, visit our site at http://www.eagletreesystems.com or email sales@eagletreesystems.com for more information.
Hi Bill,
Just a suggestion, as you now sell the stand-alone altimeter/airspeed indicators, I think that a stand-alone stall indicator would be fairly easy to implement by using most of the firmware/hardware of the airspeed indicator.
add a pushbutton to program the stall speed in conjunction with the seven segment LED, add a FET to act as a switch to an external light (a Luxeon Flash would be ideal here), some changes to the firmware and voila, a 'stand-alone' stall indicator. Would save me the trouble of building my own! :D
of course, if there is enough programming space left, there is no reason why both the airspeed and the stall speed features could not be incorporated in the same package.
Regards,

Jacques