PDA

View Full Version : Help! circuits trasmitter reciever


HackoBoy
Nov 16, 2006, 03:29 PM
hello , i am from Bulgaria :))) and sorry for my english
i need circuit diagram for:
transmitter and reciever = 4 commands and
range about 500 metre
give me some simple :)) for rc car

fredhs
Nov 17, 2006, 03:37 AM
Hello HackoBoy,

since you are looking for a range of 500 meters, IR is basically out. Unless you are experienced with RF circuitry, go for something commercial (rx/tx circuit boards), e.g. the rx and tx used in this project (do not know about the range):

http://www.e-dsp.com/how-to-build-your-own-wireless-receiver-and-transmitter-device-create-rf-in-your-embedded-application/

You would need some microcontroller experience to complete this project.

I do not know if homebuilt R/C systems are even legal in your country -- familiarize yourself with the permissible frequency bands and other applicable regulations before you venture into a DIY project.

Best of luck,

Fred

john whitehead
Nov 17, 2006, 09:37 AM
hello , i am from Bulgaria :))) and sorry for my english
i need circuit diagram for:
transmitter and reciever = 4 commands and
range about 500 metre
give me some simple :)) for rc car

You can buy easy to construct :D receiver kits which perform very well :) :) on 35 and 40mhz from MICRON RADIO CONTROL here in UK.

John

Daniel7866
Nov 17, 2006, 07:47 PM
Some things of interest at NORCIM ;) http://homepages.tesco.net/ada.tippett/ .

Daniel