PDA

View Full Version : Pico Stick Aerobatic !!

DRMA
Aug 12, 2002, 10:45 PM
Are you sure !! The GWS Pico Stick is a slowfly!
How can it perform aerobatic ???

Modification are as follows.
GWS Pico Stick with symmetric foil (Fly weight 8oz)
1.couple another wing tape them together to become symmetric
2.cut out the aileron
3.Change the rudder to fixed
Receiver : Futaba RF-115F
Motor : GWS IPSD-B RLC w/GWS 9x7 (7.2V 5.1A 4400rpm)
Battery GWS 7.2V 400maH Ni-CD
ESC : GWS ICS-100
Servo : GWS PICO STD x 2
DRMA
Aug 12, 2002, 10:47 PM
It perform wild aerobatic like up side down during take off.
DRMA
Aug 12, 2002, 10:49 PM
Really !! Ready to become prop hang !!
DRMA
Aug 12, 2002, 10:50 PM
Miracle !! This little urgle perform prop hang in the windy day !!
DRMA
Aug 12, 2002, 10:52 PM
The Thunder Tiger Fun P-51 come alone to see what happen to the little stuff.
DRMA
Aug 12, 2002, 10:53 PM
Ready to perform the rudder touch down & go ??
Are you crazy ??? You are up side down !!!!
DRMA
Aug 12, 2002, 10:57 PM
Really CRAZY!!!!
DRMA
Aug 12, 2002, 10:59 PM
Landing by reverse roll and hand pick!!

Conclusion : Make something crazy when you tired of SLOW BORING fly. Change the meek stick to wild in one hour.....
Gene Bond
Aug 13, 2002, 08:46 AM
Too much fun!

Looks great!
AirWarriorBelgy
Aug 29, 2002, 09:42 AM
looks good DRMA

lotsa fun....and giving me ideas for pico stick fd

<<S>>
Belgy
DRMA
Aug 29, 2002, 11:33 AM
Originally posted by AirWarriorBelgy
giving me ideas for pico stick fd
<<S>>
Belgy

What dertail do you want to know ???
Modification procedure ??
Fly setting ???
operculum
Sep 26, 2002, 05:18 PM
How did you set up the servo control on the ailerons?
DRMA
Sep 26, 2002, 07:03 PM
Originally posted by operculum
How did you set up the servo control on the ailerons?
The AIL servo is glued to the fuselage stick directly which
will work fine for both AIL and rudder version. <The Wild aerobatic stick can be switched back to slow stick using
rudder control anytime.>

Using 1.5mm hard wire bending to L linkage for the AIL control.
DRMA
Sep 26, 2002, 07:06 PM
A short pice of copper tube with a small hole solder on the top
of AIL L wire for connection to servo horn.
iankraus
Sep 26, 2002, 07:17 PM
looks like some cool mods.
Nice to see your having fun tearing up the sky with it.

Ian
ian@iankraus.com
www.JustPerformanceRC.com (http://JustPerformanceRC.com)