TinyTrak Help

[workshop]

Guys, I have just about every pin on the TinyTrak3+ figured out except for:

Mic In
PushToTalk In
PushToTalk Out

Jumper this/that high/low... what the f :eek: ck! You guys know me, I can figure this all out... But I'm short on time (corns' a growin'), my HAM employee is out of town and I need some cliff notes on what wire goes where... :o

Thanks in advance...

Jeff

[dalbert02]

Hmm, the TT3 is not too hard. What are you hooking it up too? For many apps, the only pins needed are:
pin6 = ground
pin1 = audio out of your radio (so you don't transmit when someone else is)
pin5 = audio in of your radio
Does this help?
-dave

[workshop]

I don't have a radio... I'm feeding the output to the Audio Channel of an "always" on transmitting Video Downlink.

So it's the PTT and Audio IN pins that have me confused... :rolleyes:

Jeff

p.s. You're right, it's not hard. I'm in a rush and need a second hand in all of this. :o

[dalbert02]

Not hard, but in my rush to help you, I made a mistake too. Sorry. :eek:
Pin 1 is audio out of the TT3 and goes to the audio in of your transmitting device. Pin 6 is ground. That is all you need. That is how I hook up mine to my Black Widow system.
-dave

[workshop]

Bingo... Thanks Dave! That is a big help...

Jeff