Littlescreamers Announcment!

[Littlescreamers]

http://www.littlescreamers.com/circus-in-town/ls_circus_white_int.png


--=>> Hobby Lobby (http://www.hobby-lobby.com/) <<=--
this is now the place to buy LittleScreamer motors!


Ta-Da!

...well, there it is. We're excited to announce that Hobby-Lobby is the new sole distributor for LittleScreamers. From this moment forward, the only way to come by one of our power houses of brushless power, is through the channels of Hobby-Lobby. With Hobby-Lobby's commanding presence in the retail of RC hobbies, we're excited for what this means for our company; to reach more pilots than previously possible, and turn them into happily screaming customers.

1000s of people already know what it's like to be a happy screaming customer and they spread the word. During those times when our ability to release product to the masses slowed, the demand never did. With a full production supply chain, and the heavy-weight retail forces of Hobby-Lobby, we're pleased that a solid path for our motors to get in the hands of end customers is now in place.

The road to this point was not easy, but it's great that the process is finally complete, and the wheels of motion can start turning in earnest.


Some thanks...

Bob Vincent (Rvincent) For all his hard work in the R&D department and the great developments that have kept LittleScreamers at the top of micro brushless technology. His countless hours and tireless attitude have contributed greatly to the growth and success of LittleScreamers.

To RCGroups.com, the formidable online RC community through which LittleScreamers found its first customers, but more importantly a wonderful collection of friends and peers. An excellent environment to participate, learn, and interact with the RC community at large. Feel free to stop by and say hi.

Thanks
Scott & Bob
littlescreamers.com

[birdlives1955]

Congratulations guys, I'm really happy for you! I might be saving up for a new motor sometime in the next few months! :D I hope it goes extremely well, and take care! May God bless you!

Your friend,

Matt

[IBWingnutz]

Congrats!!

Let the sales begin!!!;-) :D Congrats Scott & Bob, less stress for everyone now that this is underway, and the better for the RC community at large! Great stuff

Steve

[10Thumbs]

So where do we find these motors on the HL website? I checked the brushless motors page and they aren't listed. Is this announcement premature?

[shhhhh!]

Congratulations to Scott and Bob !! Well done!!

[Blaze.45]

Ring the church bells! Start the choir! Now where's that dang beam of light from the parting clouds?!

[JawaSnack]

cool, I hope this goes well for everyone!!

[goldguy]

Wonderful news for a great little motor, congratulations to the guys at LS and HL.

[Tram]

Why arn't they on HL's website yet? :)

[macr0t0r]

Patience.....patience.... There's an hourly sale going on, and only one of their webmasters is running the show (mind you, he's usually on night-shift). Give them a little time to get things updated.

- Jim

[theKM]

the website is now showing the same... littlescreamers.com (http://www.littlescreamers.com)

...and there's a bug in my code, the page/banner may or may not show up white.

[rvincent]

Whew!!

You all have no idea how long and hard we worked to get this done :D Glad it's finally out! Yeee-Haaa!!!!

[LKC]

So how many production winds will be available ?
and will they be named the same as RCG members are used to ?
Denovo, purple peril, Park Jet, Speed Scream ect..

Atleast the LS motors will be suitable for the $2.99 shipping worldwide.. :)

Luke

[rvincent]

Luke,
Thanks for asking. Yes they will be the same names and the Speed Scream and Jet Scream will be available sometime in or about mid October. All motors will also now be strictly metal construction for ease of assembly at the factory.

[birdlives1955]

Sweet! Time for a couple of jet screams for a twin Alfa fan powered scrathcbuilt Su-47! :D

[Tom Korn]

Will they be available without the prop saver?

[rvincent]

We added 4mm to the shaft length. So you can use them both ways. If you choose to not use the prop saver feature, you can remove the 4-40 machine screws, and replace them with the supplied 4-40 set screws. The Park Jet motors will come with set screws in place and the machine screws will be in the package. This will also make it easier to replace bent shafts after a crash. All motors will have 3mm diameter x 40mm long shafts.

[Pastulio132]

Do they still come with the two motor mounts?

[Tram]

Hehe.. the Jet Scream.. That's what we call the Jet Stream I fly... :)

[Skyking213]

Hey rvincent,
Do you know if they have stock now?
ScottB

[Larry3215]

Hobby-Lobby will start by haveing one of the famous "Back-order" sales for Little Screamers :D

Larry

[Amp User]

So the shaft wont be such a snug fit as the original screamers?

[rvincent]

What do you mean "snug fit" ?? It will press in easily, but not fall through if that's what you mean?

[Littlescreamers]

So the shaft wont be such a snug fit as the original screamers?


Nothing has change as far as the prop-saver. We just added a few mm to the length of the shaft for people to be able to use lock on prop adapters. Still the same snug fit as always:D

Scott

[Amp User]

Hand fed with a light tap of whatever you have in the field box would be ideal when the shafts bend at the flying field. If I do a bit of a drive for a fly in, I dont want to cut my flying time short if that was the motor of choice for the day.

[Amp User]

I could of course try a round file out, I do like the option of using grub screws.

[Nethole]

When do we get to see Dr. Kiwi's posts of the actual performance of the motors?

[Tom Korn]

Thanks for the info, rvincent.

[c/f]

Good news, LSr, when will stickers be available for the test pilots????

PS
SO for those who never want to worry about bent motor shafts............

If your tired up replacing motor shafts, De'last shaft has arrived........

70 Rockwell 3mm pictured for LSr use, ready to ship, any length, normal C-clip end, preffer to ship long and customer cut to length as needed......

These will not bend...... COMBAT tested over concrete........Satisfaction guaranteed....

All dia. available upon request. Flats can be provided upon request, CANNOT thread or tap.... special lengths, dia, tooling email for pricing.

3mm, shaft 25-50mm length,

PM if interested

[Littlescreamers]

I need to try one of those! 50mm will work for me:D

Scott

[rvincent]

c/f,
NICE!!!!!

[Nethole]

SO when are these motors going to show up on hobby-lobby's website?

[Skyking213]

SO when are these motors going to show up on hobby-lobby's website?

AND, when will they have some stock?

[Larry3215]

Keep checking THIS page (http://www.hobby-lobby.com/bargain-bo.htm) :)

Larry