Aero-fever - "FunboatJet II"

[Albert_Moto]

The new "FunboatJet II" will be available very soon !!

Retail Price: US$45
(Wholesale enquries are welcome)

Stay Tune on www.aero-fever.com ;)

Albert

[Albert_Moto]

Arrival!! Ready for sell now~~

Albert
www.aero-fever.com

[Albert_Moto]

Here is the C.G. reference of our FunboatJet II. :)

& Short Flying Video --> Download <-- (http://hkrcpilot.com/videodatabase/17-9-2006/FBJ-II-Test01.wmv)

Albert
www.aero-fever.com

[docphi]

What is the AUW? What motor is recommended?

[Albert_Moto]

We recommended to use Zeta-Plus 2100kv + GWS 7060 prop. , with Zeta-plus 11.1V 1000mah or 1300mah (20-25C) li-po

The AUW is 380-430 gram...

Albert

[docphi]

Albert,

Can the manufacturer extend the center pontoon to the leading edge of the prop clearance hole? The deck twists and breaks very easily. I would also make the prop clearance hole more narrow to increase the structural support for the deck. All you need is a small slot in the deck to clear the prop.

I like the video. Looks like the cg was way off. ;)

[Albert_Moto]

Albert,

Can the manufacturer extend the center pontoon to the leading edge of the prop clearance hole? The deck twists and breaks very easily. I would also make the prop clearance hole more narrow to increase the structural support for the deck. All you need is a small slot in the deck to clear the prop.

I like the video. Looks like the cg was way off. ;)

Hi docphi,

Thanks for your advise. Can u send me some photos to show it ?

Best wishes,

Albert

[docphi]

Albert,

Here is what I would do. Make the prop hole more narrow and extend the center pontoon. I would also hollow out the center pontoon to save weight. The deck twists a lot. It needs to be reinforced.