PDA

View Full Version : Discussion Ok so I am new to weed eater boats..... (update with pics)


Excogitate
May 30, 2006, 12:25 AM
He sent me a never before ran 62" +/- gas boat.

It has a engine in it that was custom over hauled by I want to say R&D Hobbies in Las Vegas.

So I have no idea what fuel mixture to run in it. Its never been ran so I am not sure what the break in is like on these etc.


So lets see where do I start?

green-boat
May 30, 2006, 11:08 AM
Pictures.

wingnut163
May 30, 2006, 11:36 AM
you prouble would get more from the form two down from this one,
Racing - Internal Combustion
the deel with that, not that some of the people on this cound not, just, there are more people there that do not read here.

Excogitate
May 30, 2006, 11:38 PM
I will get some pics asap!

charge1(ds)
May 31, 2006, 02:19 AM
Mixture try running heavy on the oil better to drown it than burn it. I would say whatever the standard 2 stroke chainsaw oil mixing is. Or look for racing mix and it should be on their.

Rex R
May 31, 2006, 02:27 AM
I believe my neighbor is running 32:1 gas/oil in his saws(not 100% sure) supose one could try the homelite site
edit
after a quicky search...I found it varies oldersaws run 32:1, new saws are running 50:1. if it were me I think I'ld start with the 32:1 mix and adjust from there

LONGBIKE
May 31, 2006, 10:31 AM
Ex,

I have an shockwave 55 with a wed eater engine and the instuctions call for a 40% mix but a 50% mix for the first two tank full runs and just putt around no wideopen till you run 2 full tanks first.

longbike

Excogitate
Jun 01, 2006, 02:14 AM
My dad seems to remember it was 50:1 but he was not sure.... I will find out for sure soon. I will have pics tomorrow!

Excogitate
Jun 02, 2006, 12:13 AM
http://members.cox.net/excogitate/smallprofile.JPG
http://members.cox.net/excogitate/small%20top%20rear.JPG
http://members.cox.net/excogitate/small%20right%20rear.JPG
http://members.cox.net/excogitate/small%20right%20rear%202.JPG
http://members.cox.net/excogitate/small%20left%20rear.JPG
http://members.cox.net/excogitate/small%20outdrive%20and%20drain.JPG
http://members.cox.net/excogitate/small%20right%20engine.JPG
http://members.cox.net/excogitate/small%20rear%20engine.JPG
http://members.cox.net/excogitate/small%20left%20engine.JPG
http://members.cox.net/excogitate/small%20front%20engine.JPG
http://members.cox.net/excogitate/small%20radio%20box.JPG
http://members.cox.net/excogitate/small%20front%20engine%202.JPG

Shaun Hendricks
Jun 02, 2006, 11:09 AM
Wow.... nice boat! Nice Dad! :D

FastBoats
Jun 14, 2006, 09:29 AM
That is a Bruce Hansen quick draw - very expensive but very fast!
I run a 26cc Mod. Zenoah, and used to run Bruce Hansen Mod. engines about 10 years ago. Currently I run Amsoil Oil at 32:1 ratio.

The engine you have is 25cc's - and very, very modified! The web site is : http://www.bhhanson.com

They recommend blue marble oil - I would call Bruce to see what ratio he recommends - a standard ratio on this motor may not cut it.

Nice boat!

chase4556
Jun 18, 2006, 09:00 PM
hot damn...that is one SWEET boat!!