G3 with Optic6 Config Controller

[pitbull]

So I can get my optic6 to do the basic controlles but how do you get all the other switchs to work IE i can't get it to config my idell up heading hold and normal mode switch any help would be great thanks

[snow520lee]

hi pitbull,

well, no matter which transmitter you got ( I've a optic too).
What you need is to switch it on before launch RFG3, otherwise you'll get the Interlink Joystick controller basic.
If you switch it on after you launch it you have to go to the controller menu, choose Interlink 6 channel. Made the calibration and than you load the airplane/hely you wish, then Edit it, and give to all your channel the function you want.
RFG3 is able to simulate the software radio, so if you use the basic setting you're able to usa a hely (just hovering -normal mode) even with a 4 Ch radio, but you must to edit your hely for work with your own pitch and throttle curves..........

I hope it'll helps you........

Marco