PDA

View Full Version : Cool Redesigned Dualsky 12A ESC! Auto Detect with Hot New features!


2dogrc
May 14, 2006, 11:31 AM
Dualksy 12A ESC http://2dogrc.com/ecommerce/os/catalog/images/xc12.jpg

2dogrc's RC Warehouse and Dualsky are proud to introduce the NEW 12A Xcontroller brushless motor ESC. This new ESC has many more programmable features and better throttle response then the previous version. We have maintained a low weight of 12 grams to better fit small electric planes. This ESC can be programmed using throttle stick commands or a soon to be released programming card. The ESC features auto cell detect and user defined voltage cutoff and start-up type. Our test team has run this ESC on many different setups including the Xmotor 200, Himax outrunners, TowerPro outrunners and gearboxed motors, all withour fail! The team has returned a favorable recommendation so now we offer the product to you!

This are available now at www.2dogrc.com (http://2dogrc.com/ecommerce/os/catalog/dualsky-12a15a-brushless-motor-p-1870.html)

This ESC includes these features:

# 5V BEC capable of suplling 1A for servos
# Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)
# Smooth and accurate speed control, excellent throttle linearity
# Extreme low resistance, super current endurance
# XMotorTM optimized timing advance.
# High rate (8 KHz) switching (PWM)
# Cutoff can be programmed for motor stop or reduced power
# Brake/No Brake operation. Stop folding props cold or let fixed props freewheel
# Full protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection
# 3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models
# Throttle range can be configured, fully compatible with all market available transmitters
# Microprocessor and BEC(Battery Elimination Circuit) use separate voltage regulator IC , with good anti-jamming capability
# Programming card coming soon (for easily programming the ESC on field)