I need help set up my A30-16M

[3D WARRIOR]

Hears the problem i have a a30-16m with a castlecrations ph35
the prop i'm using apc 12x6e i have a castlelink software v2.13 to program
the controler i need to know
current limit
timing
kv
the reason i'm using the bigger prop is for my extramflight extra 300e i just would like to know if any of you guys have that same software i'm using for
my a30 i want to know if i'm on the right track or is there another post someone can send me to?

[kyna]

3D Warrior,

I'm not overly familiar with the settings of a Castle Creations PHX35 however, I do not recommend you change the current limiter the esc comes programmed with.

The optimum timing mode for an outrunner motor is the High Advanced timing.

The kv of the A30-16M is 1060.

Best Regards,

Kyna Veatch
Office Manager
Hacker Brushless USA

[3D WARRIOR]

Thank you kyna for the help i just programed speedcontroler for the timing
now it set at high advance the next thing i would like to set is the
PWM Rate which has been on
13khz
the choices for the PWN rate are
26khz
52khz
just to give you a vision what i'm dealing with this controler so if you could help
with rest of the set up please :confused: :confused: .

[kyna]

3D,

You can leave the PWM Rate at it's original setting of 13khz, and you will be just fine.

Kyna

[3D WARRIOR]

Thank you very munch for help kyna you are the best. :)