*****GWS Motor Shaft Adaptors *****

[RAY GWS]

Here are adaptors for propeller/impeller for direct drive motor/ducted fan.

http://www.gwsus.com/english/product/other/drive%20shaft.htm

Many flyers will need these parts.

Ray from GWS

[roccobro]

Wow. Nice job getting them out for us!

Justin

[RAY GWS]

Justin,

Thank you very much. How are you doing?

what happen to your GWS F4U without rudder?

You are not too far from GWS USA.

Welcome to visit us. Especially when we have the show.

Ray

[roccobro]

Ray,
That F4U was for a "newbie" and flew fine for it's maiden. Haven't seen it since. :) But my other 2 F4U's are OK, my favorite one is on the table after a second dumb thumb manuever. :rolleyes:

Let me know when the show is. I'd love to see GWS USA in person.

Thanks,
Justin

[nubee 1]

So am I reading right that impeller hubs can now be had without cutting down the rotor

[RAY GWS]

So am I reading right that impeller hubs can now be had without cutting down the rotor

Hi,

Yes. See the photos. It is much easier to uninstall the new ducted fan now.

Ray from GWS

[nubee 1]

Hi,

Yes. See the photos. It is much easier to uninstall the new ducted fan now.

Ray from GWS

Now thats just great. Question now is who has them in stock.
Ken

And what are the part numbers ?

[RAY GWS]

Are you in the USA?
You can contact GWS USA.

the Item numbers are as following.

ITEM NO. ---------CONTENT
GWEDF055--------EDF55 with 150 motor (2245X6)
GWEDF055A-------EDF55 with 300H motor (2245X6)
GWEDF064-------- EDF64 with 150 motor (2245X6)
GWEDF064A-------EDF64 with 300H motor (2245X6)
GWDFS006--------EDF55-150 OUTER CASE (Black)
GWDFS005--------EDF55-300H OUTER CASE (Gray)
GWDFS002--------EDF-55 ROTOR (6 BLADE:2245X6) (Black)
GWDFS004--------EDF64-150 OUTER CASE (Black)
GWDFS003--------EDF64-300H OUTER CASE (Gray)
GWADP003--------IMPELLER HUB (4.55mm for EDF 55 or 64)
GWDFS001--------EDF-64 ROTOR (6 BLADE:2540X6) (Black)


Now we also have EDF75

ITEM NO. Description
GWADP004----- Impeller Hub EDF 75
GWDFS009----- EDF75 Impeller EP3045X4
GWDFS009A---- EDF75 Impeller EP3043X6

GWADP003------ IMPELLER HUB EDF 55 or 64
GWDFS002------ EDF-55 Impeller (EP2245X6 Black)
GWDFS001------ EDF-64 Impeller (EP2540X6 Black)

[PositivelyJoe]

Ray,
I hope you are still around.
What parts do I need.
I basically want the latest removable design, but with no motors. so I can put brushless motors into the GWEDF055A Black removable Fans and put them on a GWS A-10 Slope.
I just want to go with brushless, so I do not want the whole A-10 kit with motors. as I would have to replace/toss the stock harness as well, and I do not want the landing gear either.

I'm guessing:
GWDFS005--------EDF55-300H OUTER CASE (Gray) x2
GWDFS002--------EDF-55 ROTOR (6 BLADE:2245X6) (Black) x2
GWADP003--------IMPELLER HUB (4.55mm for EDF 55 or 64) x2

set screws???

Thanks