PDA

View Full Version : Discussion monoplan F3P aeromusical

EXEL 2005
Mar 30, 2006, 05:11 PM
Hy everybody,
Some pictures of my new plane, wingspan 80, weight 140 grs( 4.94Oz).
best regards

SEB
KNUFFAN
Mar 30, 2006, 06:05 PM
You do really nice work man!
Malves
Mar 30, 2006, 07:06 PM
Very, very nice!!
Trisquire
Mar 30, 2006, 07:22 PM
Is that a Tribal V2?

http://www.donuts-models.com/pages/indoorpag.html
EXEL 2005
Mar 31, 2006, 04:10 AM
Hy guy,
This model surely will be remplacant of Tribal V2, it's comming from DONUTS MODELS lasting September.

best regards
SEB
Aio_1
Mar 31, 2006, 11:22 AM
Nice plane
Is that a CK motor you have in it?
If so can you tell me where they're available?

Aidan
EXEL 2005
Mar 31, 2006, 11:53 AM
Yes , it's the CK motor, the 2C/20/310, you can buy it directly in CK home page: http://www.brushlessmotors.co.uk
or in France: http://www.donuts-models.com/pages/44alhomepag.html
it's an expensive motor, but certainly the best weight/power rate for F3P programme. with a 2 cells 300mah E-TEC and Phoenix 10 controler , it's a great and light power system, less than 41 grs(1.45 oz).

regards
SEB
3dflyindan
Mar 31, 2006, 01:13 PM
is there plans for it ?

or just kit ?

dan
EXEL 2005
Mar 31, 2006, 04:46 PM
No plan, just a kit for the beginning of September.
Regards

SEB
Alexandre Cruz
Mar 31, 2006, 08:49 PM
How many Amp does this motor pulls on full power? What about thrust is it really 310g?
EXEL 2005
Mar 31, 2006, 10:14 PM
thrust and amps are for gws 8x4.3 using, for a 9x4.7 prop, it pull, 7.8 amps, and thrust is 285 grs, but power is more flexible for F3P pattern flyght.
Regards

SEB
Aio_1
Apr 01, 2006, 07:06 AM
Yes , it's the CK motor, the 2C/20/310, you can buy it directly in CK home page: http://www.brushlessmotors.co.uk (http://www.brushlessmotors.co.uk/)
or in France: http://www.donuts-models.com/pages/44alhomepag.html
it's an expensive motor, but certainly the best weight/power rate for F3P programme....

Thanks for the link. I've seen the CK motors in use but hadn't seen the specifications before. I just bought a Flyware MicroREX 220/6-1600 for about the same money. I wouldn't have said it's an expensive motor - I haven't seen many cheaper ones that were worth having. The Strecker motors and some others are considerably more costly!

The CK seems excellent. I hadn't seen it when I got the MicroREX or I might have considered it but they're pretty comparable in weight and power handling. The MicroREX 220/6-1600 should be okay at 7.5A and weighs 21g. I'll be using it on 3s TP480 cells and GWS 7x3.5 prop. I've measured it on the bench and found 5.1A @ 10.1V = 52W. With an 8x4.3 it should be around 7.5A. However I'm carrying 3 cells (34g).

Aidan