Clearview,Futaba 8UAFS (UK Version,FF8)Simblaster

[Matt Halton]

Hi, was wondering if anyone could explain why I can't config. this Tx. to run in clearview,FMS,or G2.
Have calibrated in windows xp,,but goes,for want of a better word,'jerky'.
I know how to set up the flying controls,but am having no luck at all.

At best it will run the controls,kinda hopping from one surface to another in the sim,but am completely stuck for ideas now...
Would appreciate some help with this!

Many thanks

Matt

[skirtz]

I would make sure that you have no other USB devices conected, some can interfere with your controller. If you eliminated this, go to Start, Control Pannel, Game Controllers. Select your controller and see if the controls are jumpy there. If that is the case, you have bad pots.

Stefan
http://rcflightsim.com

[Matt Halton]

Hi Stefan

Thanks for the reply,I have done that,and is jumpy there too.Curiously,my radio system works fine in 'real life' i.e. when being used normally with no hint of jittering,or non commanded inputs.

Your software works great with my USB game controller,but have some other USB devices plugged into the ports,so will remove them and try again,must be why this is happening.

Will try again,and let you know what happens.

Thanks!

Matt