GWS brushless out runner 22XX motors and ESCs.

[GWS4CEO]

GWS brushless out runner motors and ESCs finally on the production. :p

http://www.gws.com.tw/chinese/product/auxcircuit/brushless.htm

OUTRUNNERS Brushless Motor 2205/15T 建議售價/ NT$430; MSRP in USA $15.

OUTRUNNERS Brushless Motor 2208/18T 建議售價/ NT$515; MSRP in USA $18.

OUTRUNNERS Brushless Motor 2212 建議售價/ NT$600; MSRP in USA $21.

Brushless ESC 無刷電子變速器 GWESC15A 建議售價/ NT$715; MSRP in USA $25.

Brushless ESC 無刷電子變速器 GWESC25A 建議售價/ NT$1000; MSRP in USA $35.

Brushless ESC 無刷電子變速器 GWESC35A 建議售價/ NT$1300; MSRP in USA $45.

May be pretty late for them to come, but with great cost-performance as the rest of GWS products had done. :)

[GWS4CEO]

2208 will be shipped at the end of FEB. from GWS China. Dealers should be able to get them early March.

2212 will be shipped at the end of March. from GWS China. Dealers should be able to get them early April.

30XX will follow into production at this summer. :) For the thrust from 1000g~2000+g. :cool:

[GWS4CEO]

GWS China just finished 2nd batch of BL motors and ESC. Catch on time to tranship out from Hong Kong via TNT, UPS and Fedex before Chinese New Year Vocation started. :)

[carl rich]

what is the thrust available on the 2212 outrunner?

carl

[GWS4CEO]

what is the thrust available on the 2212 outrunner?

carlI tried with an GWS EP9050HD prop with GWS 3 cells 2200mAh ( Not a high C rating cell ), the current about 10 amp, that give 690g when fully charged.

After a little voltage drop, reading down to 650... Still more than 600g aways. :)

[GWS4CEO]

Also tried 2208 with EP8040 with 2 cells 1050mAh, got 300g thurst at 5 amps.

Only comsume 35W for 300g thrust. :)

Pretty good for long endurance. ;)

See the test datas:
2205 http://www.gws.com.tw/chinese/product/motor/gwblm001.htm
2208 http://www.gws.com.tw/chinese/product/motor/gwblm002.htm

[GWS4CEO]

The 3rd lot of 2205 motors and 15A ESC are under production line. :)

Will be finished by the end of Feb. 2006. :cool: