View Full Version : Discussion Hello from GWS
GWS4NICOLELIN
Jan 23, 2006, 05:14 AM
Hello all, :)
It is very nice to have a forum for Brazil. Let's introduce ourselves.
My name is Nicole Lin from GWS. ;)
If you would need any help on GWS products or need to get GWS products. I will be very happy to assisit you. :cool:
My email is nicole@gws.com.tw :p
www.gws.com.tw
Lucke
Jan 24, 2006, 07:51 AM
Thanks Nicole !
If I need IŽll contact you
Best regards,
Lucas
Guga
Jan 24, 2006, 09:51 AM
Welcome to our corner NIcole...
regards, Guga
alexcmag
Jan 24, 2006, 03:02 PM
Hi, Nicole,
It is very nice to have your post here.
Due to your name, I presume GWS is a "family business" like most companies in Brazil.
I have no questions, just want to say thank you for the interest in our group, for making my toys, and for listen the customers.
I just tested the E-starter 400 I won in Christmas, and loved it. The first flight was on a beach, with a lot of wind and very tight space to approach and landing. It has performed very well with very safe aileron turns at low speed and low altitude, better then I expected.
My other GWS airplane was a SlowStick 400. Both make me very happy, they are very stable and easy to mount and to fly, great choices for beginners or even to pro pilots.
These two are the only two "factory made" airplanes I have, the others are all built from scratch but uses your servos (a dozen), ESCs (5) and receivers (4), all working very well (of course I will never expect a US$20 indoor receiver to work as good as a $100 one...).
BTW, I will send a PM with my address to receive the gift for my free advertising :) ... Just kidding...
Regards,
GWS4NICOLELIN
Mar 22, 2006, 02:55 AM
Thanks Nicole !
If I need IŽll contact you
Best regards,
Lucas
OK, Lucas.
I wish you have a very nice day ;)
Nicole
GWS4NICOLELIN
Mar 22, 2006, 03:02 AM
Welcome to our corner NIcole...
regards, Guga
Hi Guga,
Thank you for your greeting. ;)
If you need my service, please feel free to contact me at nicole@gws.com.tw :p
Have a cheerful day. :cool:
Nicole
Cebola
Mar 23, 2006, 09:59 PM
Hello Nicole
GWS has very good image in Brazil, products whit good performance and low prices.
Be wellcome in the Brazilian space and let us know about the new GWS products.
Best regards
Cebola
Brazil
GWS4NICOLELIN
Mar 24, 2006, 02:43 AM
Hello Nicole
GWS has very good image in Brazil, products whit good performance and low prices.
Be wellcome in the Brazilian space and let us know about the new GWS products.
Best regards
Cebola
Brazil
Hello Cebola, :)
OK, I will let you and guys here knows if we have new products. ;)
Otherwise, you can also send a email to me nicole@gws.com.tw directly when you need any helps.
Best regards,
Nicole
GWS4NICOLELIN
Mar 24, 2006, 03:04 AM
Hello Nicole
GWS has very good image in Brazil, products whit good performance and low prices.
Be wellcome in the Brazilian space and let us know about the new GWS products.
Best regards
Cebola
Brazil
GWS are presenting more products to you. We have the following new products:
1. GWS HD1260 Propeller
GWS has one more propeller for you. We just added a new size of propeller in the GWS HD Series: HD1260 Propeller. GWS HD Series Propeller with excellent performance is designed by GWS CEO, Mr. Lin. It provides you more thrust with less current draw. You are welcome to test and compare with other major brands in the market. This will be an excellent propeller for GWS Formosa II flyers to use. With shaft attach rings, it will fit 3 mm, 4 mm, 5 mm, 6 mm shafts.
Item Number: GWPRO001
2. GWS EZ Pushrod Connector In Stock Now.
The photo below is the GWS EZ Connector for pushrods. It comes with 5 EZ connectors and Allen wrench. Using set screw to decrease the weight. This will ensure you be able to install pushrod easily on the servo horn. Keep these parts handy to make your life easier and with more time to fly.
Item Number: GW/FAS7A
3. Brushless Motors / Speed Controllers / GWS Brushless ESC Programming Card
GWS has more products in related to Brushless motors. We have 2 more Brushless Speed Controllers plus GWS Brushless ESC Programming Card.
Item Number Description Notes US Retail
GWESC15A Brushless Speed Controllers 15A Available Now $25
GWESC25A Brushless Speed Controllers 25A Available in March $35
GWESC35A Brushless Speed Controllers 35A Available in March $45
For Brushless Motors:
After 2205/15T Brushless Motor, GWS has 2 more brushless outrunner motors. Bigger motors with more power for you to enjoy the flight and feel the thrill. Please check our web page for more detail info.
Item Number Description Notes US Retail
GWBLM001 2205/15T Brushless Motor (Right) Sold Out & Back-ordered& Available in March $15
GWBLM002 2208/18T Brushless Motor Available in March $18
GWBLM003 2212/13T Brushless Motor (Left) Available in March $21
GWS Brushless ESC Programming Card
Item Number: GWPGM001
US Retail Price: $10
Flyers can carry this small & compact programming board to the flying fields and change the setting on the GWS Brushless Speed Controllers without a PC. The functions flyers can change:
1. Battery Cutoff Voltage
2. Brake Setting
3. Responding Delay Time to Throttle
4. Switching Frequency
5. Timing Advance
For More info and photos -- please click the link below. :D
http://download.gwsus.com/gwstw/gwsnews0218.doc
We will try to keep you updated about GWS product and information. If you are interested in this new product, please contact me at nicole@gws.com.tw
Yours truly,
Nicole
apatitucci
Mar 24, 2006, 01:59 PM
Hi Nicole,
I am a happy owner of a 2205 brushless motor (I wish that in Brazil they would cost only $15).
My question is: are there any official procedures to reverse the shaft direction, thus having the outrunner part in front? If so, how can one use the provided propsaver with this configuration?
Thanks a lot,
Andrey
Cebola
Apr 27, 2006, 10:55 PM
Nicole
About a brushless ESC, are GWS planning something about?
Cebola
Brazil
RAY GWS
Jun 15, 2006, 09:17 PM
Hi Cebola,
now we have ECS15A, 25A, 35A
Hi Andrey,
photo -- for your info.
apatitucci
Jun 20, 2006, 09:42 PM
Hi Ray,
Thanks for the reply.
Unfortunatelly my motor doesn't have that second adapter with the small screw (one in the left in the picture). I only have that fixed adapter in the back.
Regards,
Andrey
RAY GWS
Jun 20, 2006, 10:04 PM
hi Andrey,
do you need one?
I can ask our staff put it in envelop and mail to you.
Ray from GWS HQ
please let me know.
GWS4NICOLELIN
Jun 26, 2006, 03:49 AM
Hi Ray,
Thanks for the reply.
Unfortunatelly my motor doesn't have that second adapter with the small screw (one in the left in the picture). I only have that fixed adapter in the back.
Regards,
Andrey
Hi Andrey,
Please send your mail address or inquiries to nicole@gws.com.tw for further help.
Regards,
Nicole
vBulletin® Copyright ©2000-2009, Jelsoft Enterprises Ltd.