GWS８ch受信機がF5B２７セルクラスの日本チャンピオン機に搭載されていま&#

[GWS4CEO]

GWS R8D receiver won Japan F5B27cells Champion!

Not a news, but some thing worth to be reported about GWS R8D great record!

http://www.page.sannet.ne.jp/craftrm/topics.html
" GWS８ch受信機がF5B２７セルクラスの日本チャンピオン機に搭載されていました！

GWS８chデュアルコンバージョン受信機が本年度埼玉県加須で行われたチャンピオン機（坂井機）に 搭載さ れました。

最も条件の厳しいF5B２７セルクラスに搭載されましたが全く問題なく作動しその結果坂井氏は 本年度F５B 日本チャンピオンとなりました。"

New GWS 8ch + even come with better perforamce and longer service range. :cool:

[k-yoko]

でもシングルはインドアでは隣接チャンネルには非常に弱く
全く使えません！（７２メガだけでしょうか？）
私は同じものを５個持っていますが、全てダメでした。
アンテナの方向、クリスタル等色々変更したのですが同じでした。
値段と軽さが良いのですが、非常に残念です。

[ssatoru]

Hi Mr. Lin,

How did you write Japanese? :)

I also use R8D on large electric. It is compact and very stable so far. This product should sell more.

But many Japanese user complain on glitches on smaller Rx here, as k-yoko san mentioned. If you have any idea or suggestion for better usage, it is better to publish. I myself does not have problem with R4 or R6 at all, but I feel Futaba user has more issues?? :confused:

Satoru

[GWS4CEO]

Hi Mr. Lin,

How did you write Japanese? :)

I also use R8D on large electric. It is compact and very stable so far. This product should sell more.

But many Japanese user complain on glitches on smaller Rx here, as k-yoko san mentioned. If you have any idea or suggestion for better usage, it is better to publish. I myself does not have problem with R4 or R6 at all, but I feel Futaba user has more issues?? :confused:

SatoruI learned very little Japanses when in university. My father educated by Japanese system before WW-II. ;) That words were written by my Japanese distributor. :p

My father had long business relation with Japan, but just retired a few years ago, he is at the age of 80 this year.

I believe that if k-yoko san had chance to compare with Futaba small RX side by side, he will find GWS performance better in the same size. :p

GWS even has new R8DSL now. Wish you had chance to try. :)
http://www.gwsus.com/english/product/receiver/rd8sl.htm

[John Kim]

林社長さん

We meet here again on this Japanse forum. Happy New Year.　賀正
Typing in Japanese is so hard that I will write in English. You will not understand Japanse anyway.

I still use single conversion receivers in gliders which I fly in the mountain.
I also use micro single conversion receivers in park flyers which I fly at uncrowded parks or open fields but not at a crowded model airport.

Have you found yet manufacturers of inexpensive brushless motors and speed controls?
I believe there is a great market potential for such products because they are overpriced now.

[GWS4CEO]

林社長さん

We meet here again on this Japanse forum. Happy New Year.　賀正
Typing in Japanese is so hard that I will write in English. You will not understand Japanse anyway.

I still use single conversion receivers in gliders which I fly in the mountain.
I also use micro single conversion receivers in park flyers which I fly at uncrowded parks or open fields but not at a crowded model airport.

Have you found yet manufacturers of inexpensive brushless motors and speed controls?

I believe there is a great market potential for such products because they are overpriced now.Yes, GWS will start to produce and sell BL motors. :)
http://www.rcgroups.com/forums/showthread.php?t=447979

GWESC15A Brushless Motor Speed Controller
http://www.rcgroups.com/forums/showthread.php?t=459477

After many test on GWS brushless outrunner 2205 and 2208, here are my suggestion for the use of them:

I feel 2205 runs great efficiency at 300~400+g thrust. Would suggest 2205 to be used on GWS J-3, Beaver, BN2, C47, Slow Stick, GWS TM,....

2208 runs great efficiency at 500~600+g thrust. Would be great to be used with GWS WW-IIs, TM400, Formosa, E-Starter....

First lot of 2205 BL motors and ESC15A were shipped on the way to GWS USA and GWS HQ in Taiwan.

Should be seen at AMA Ontario show! :)

[John Kim]

GWS4CEO,

Any plan to venture into Spread Spectrum radio? If you are able to produce this interference-free radio while large competitors are still sleeping, GWS will become a top manufacturer of R/C radio.

I know a retired American electronics engineer and SS expert who is offering his expertise as a consusltant to any radio manufacturer. If you are interested, send me a private message.

[ssatoru]

Hi Mr. Lin,

It is very good to see GWS is finally coming with good value brushless motor and ESC! I am watching the test thread over GWS forum.

One point I miss is you should offer good mount for standard GWS stick mount. :)

Satoru

[GWS4CEO]

Hi Mr. Lin,

It is very good to see GWS is finally coming with good value brushless motor and ESC! I am watching the test thread over GWS forum.

One point I miss is you should offer good mount for standard GWS stick mount. :)

SatoruYes! You bet right, GWS is working this project. ;)

[GWS4CEO]

GWS4CEO,

Any plan to venture into Spread Spectrum radio? If you are able to produce this interference-free radio while large competitors are still sleeping, GWS will become a top manufacturer of R/C radio.

I know a retired American electronics engineer and SS expert who is offering his expertise as a consusltant to any radio manufacturer. If you are interested, send me a private message.I think that you give a great guide line for GWS. :cool:

I will fly to USA on 12th evening for AMA Ontario model show. Wish that I will have chance to meet you there again. :)

[John Kim]

Mr. Lin,

I will be there.

[GWS4CEO]

Mr. Lin,

I will be there.I am sorry that I can't catch this great AMA show! :o

Since too many visitors come to Hong Kong and extend their trip to GWS China. I can not but to stay in GWS China...

http://www.rcgroups.com/forums/showthread.php?t=467026

http://www.rcgroups.com/forums/showthread.php?t=460137&page=2

[John Kim]

Pres. Lin,

You can always contact me via private message.

[GWS4CEO]

.....
Just to say something positive about GWS RXs is that I purchased a GWS 8 channel dual conversion RX some time ago and have had no bad experiences at all, it is a little bulky and heavy though, but hey now with lipos and brushless the plane barely notices it. :)I am happy to share the experience from the GWS RX user.

GWS sold thousands RXs to world wide. :)

I hope some one who are perfessional in RX performance check to say the facts about our 8ch R8D and R8DSL. :)

[GWS4CEO]

GWS new RD8SL had proved in many skill RC pilots! :)

Wish you also have chance to try. :cool: