rckenon rollbars for savage

[M78Ultra]

Anyone used one?
Any info?

[DanTXD]

"M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
> Anyone used one?
> Any info?
>
>

In this subject, i'd like a half cage that will project the engine if anyone
has any experience or knowledge of one existing anywhere? Preferably Delrin
as it won't break or bend, but i could be talked into Ti ;-) Even better
would be if it wasn't offensively ugly...

--
Dan

[\Doc\]

"DanTXD" <me@privacy.net> wrote in message
news:3vhh5rF15q2daU1@individual.net...
> "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
> news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
>> Anyone used one?
>> Any info?
>>
>>
>
> In this subject, i'd like a half cage that will project the engine if
> anyone has any experience or knowledge of one existing anywhere?
> Preferably Delrin as it won't break or bend, but i could be talked into Ti
> ;-) Even better would be if it wasn't offensively ugly...
>
> --
> Dan
>

I'm just wondering what the hell you guys are doing to your Savages that
produces the need for a rollbar (other than stock) or a half-cage for that
matter! I beat mine mercilessly and haven't had the need for either of
those yet....................just curious?

Doc

[mike smith@yahoo.com]

On Sun, 4 Dec 2005 22:16:14 -0500, "\"Doc\"" <nospam@noway.com> wrote:

>
>"DanTXD" <me@privacy.net> wrote in message
>news:3vhh5rF15q2daU1@individual.net...
>> "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
>> news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
>>> Anyone used one?
>>> Any info?
>>>
>>>
>>
>> In this subject, i'd like a half cage that will project the engine if
>> anyone has any experience or knowledge of one existing anywhere?
>> Preferably Delrin as it won't break or bend, but i could be talked into Ti
>> ;-) Even better would be if it wasn't offensively ugly...
>>
>> --
>> Dan
>>
>
>I'm just wondering what the hell you guys are doing to your Savages that
>produces the need for a rollbar (other than stock) or a half-cage for that
>matter! I beat mine mercilessly and haven't had the need for either of
>those yet....................just curious?
>
>Doc
>
>
this

[DanTXD]

<mike smith@yahoo.com> wrote in message
news:od88p1hnsmf7nj5hj3cdmggactdnso1ssd@4ax.com...
> On Sun, 4 Dec 2005 22:16:14 -0500, "\"Doc\"" <nospam@noway.com> wrote:
>
>>
>>"DanTXD" <me@privacy.net> wrote in message
>>news:3vhh5rF15q2daU1@individual.net...
>>> "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
>>> news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
>>>> Anyone used one?
>>>> Any info?
>>>>
>>>>
>>>
>>> In this subject, i'd like a half cage that will project the engine if
>>> anyone has any experience or knowledge of one existing anywhere?
>>> Preferably Delrin as it won't break or bend, but i could be talked into
>>> Ti
>>> ;-) Even better would be if it wasn't offensively ugly...
>>>
>>> --
>>> Dan
>>>
>>
>>I'm just wondering what the hell you guys are doing to your Savages that
>>produces the need for a rollbar (other than stock) or a half-cage for that
>>matter! I beat mine mercilessly and haven't had the need for either of
>>those yet....................just curious?
>>
>>Doc
>>
>>
> this

Ah..... that.

--
Dan

[DanTXD]

""Doc"" <nospam@noway.com> wrote in message
news:dqmdnQVfvqdiLQ7enZ2dnUVZ_s6dnZ2d@adelphia.com ...
>
> "DanTXD" <me@privacy.net> wrote in message
> news:3vhh5rF15q2daU1@individual.net...
>> "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
>> news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
>>> Anyone used one?
>>> Any info?
>>>
>>>
>>
>> In this subject, i'd like a half cage that will project the engine if
>> anyone has any experience or knowledge of one existing anywhere?
>> Preferably Delrin as it won't break or bend, but i could be talked into
>> Ti ;-) Even better would be if it wasn't offensively ugly...
>>
>> --
>> Dan
>>
>
> I'm just wondering what the hell you guys are doing to your Savages that
> produces the need for a rollbar (other than stock) or a half-cage for that
> matter! I beat mine mercilessly and haven't had the need for either of
> those yet....................just curious?
>
> Doc
>

I saw someone land on the concrete on his engine head and need a new
engine/plate/brace - it scared me :)

--
Dan

[mike smith@yahoo.com]

On Mon, 5 Dec 2005 11:51:24 -0000, "DanTXD" <me@privacy.net> wrote:

><mike smith@yahoo.com> wrote in message
>news:od88p1hnsmf7nj5hj3cdmggactdnso1ssd@4ax.com...
>> On Sun, 4 Dec 2005 22:16:14 -0500, "\"Doc\"" <nospam@noway.com> wrote:
>>
>>>
>>>"DanTXD" <me@privacy.net> wrote in message
>>>news:3vhh5rF15q2daU1@individual.net...
>>>> "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
>>>> news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
>>>>> Anyone used one?
>>>>> Any info?
>>>>>
>>>>>
>>>>
>>>> In this subject, i'd like a half cage that will project the engine if
>>>> anyone has any experience or knowledge of one existing anywhere?
>>>> Preferably Delrin as it won't break or bend, but i could be talked into
>>>> Ti
>>>> ;-) Even better would be if it wasn't offensively ugly...
>>>>
>>>> --
>>>> Dan
>>>>
>>>
>>>I'm just wondering what the hell you guys are doing to your Savages that
>>>produces the need for a rollbar (other than stock) or a half-cage for that
>>>matter! I beat mine mercilessly and haven't had the need for either of
>>>those yet....................just curious?
>>>
>>>Doc
>>>
>>>
>> this
>
>Ah..... that.

[M78Ultra]

Landing incorrectly to often, off of extreme jumps!
I have basically stripped out all the holes that hold the factory roll bar
on now! (Not Good)
There HAS to be something better!
Drilling some holes in the chassis plates I feel will be a necessity!
I would rather bend chassis plates at a mount point than have to replace
tranny and rx casings!
Plus, the factory body has to fit! =)

""Doc"" <nospam@noway.com> wrote in message
news:dqmdnQVfvqdiLQ7enZ2dnUVZ_s6dnZ2d@adelphia.com ...
>
> "DanTXD" <me@privacy.net> wrote in message
> news:3vhh5rF15q2daU1@individual.net...
> > "M78Ultra" <M78Ultra@REMOVEtriad.rr.com> wrote in message
> > news:txLkf.850$TU6.470077@twister.southeast.rr.com ...
> >> Anyone used one?
> >> Any info?
> >>
> >>
> >
> > In this subject, i'd like a half cage that will project the engine if
> > anyone has any experience or knowledge of one existing anywhere?
> > Preferably Delrin as it won't break or bend, but i could be talked into
Ti
> > ;-) Even better would be if it wasn't offensively ugly...
> >
> > --
> > Dan
> >
>
> I'm just wondering what the hell you guys are doing to your Savages that
> produces the need for a rollbar (other than stock) or a half-cage for that
> matter! I beat mine mercilessly and haven't had the need for either of
> those yet....................just curious?
>
> Doc
>
>
>

[\Doc\]

<mike smith@yahoo.com> wrote in message
news:2bv9p15fja0317c3oa8bjsmknmuur9bbnq@4ax.com...
> hey doc, Where you live?

Ohio. You??

Doc

[mike smith@yahoo.com]

ILL

On Tue, 6 Dec 2005 17:24:51 -0500, "\"Doc\"" <nospam@noway.com> wrote:

>
><mike smith@yahoo.com> wrote in message
>news:2bv9p15fja0317c3oa8bjsmknmuur9bbnq@4ax.com...
>> hey doc, Where you live?
>
>Ohio. You??
>
>Doc
>