*** Best AIRWOLF Scale for T-REX HDE and CDE will be available SOON in USA ***

[HeliDirect]

HeliDirect brings best products and best prices to flyers.

Upcoming product is a new AIRWOLF scale for T-REX that is going to be in USA very soon. The fuselage is done with a lot of details to make sure it looks so real outside. Remote Control retract system is available with the kit. The fuselage is also available pre-painted. It is so easy to assemble, the whole process within half an hour. So unlike other fuselage, this one is is like ARF fuselage. Impressed!!!

This Airwolf Come with lot of Features:

1. Direct fit with T-REX HDE & CDE
2. Retract System using only 1 Servo (Servo Optional)
3. Magnet Mounting System, For easy battery replace
4. Airbrush Upper and Rear Exhaust for realictic
5. Mesh Vents cut out and pre-installed

Pictures cannot tell the whole story, got to love this.
Vids coming soon... Only @ HeliDirect.com

http://www.helidirect.com/images/Airwolf_1.jpg
http://www.helidirect.com/images/Airwolf_2.jpg
http://www.helidirect.com/images/Airwolf_3.jpg
http://www.helidirect.com/images/Airwolf_4.jpg
http://www.helidirect.com/images/Airwolf_5.jpg

Will have a lot of fun.

Steve

[luc]

price??

[HeliDirect]

tentitative pricing is the PEGT good quality plastic airwolf body is 40usd, retract 40usd, together full set 70usd, that's not include painted. To get it a set just like in the picture pre-painted, it will be about 100usd-120usd.

Do you want pre-painted or you want to paint it yourself?

Steve

[spit-boy]

Excuse me if I'm wrong, but this does look awefully identical to the Bol Models airwolf fuselage. I had to adapt that one quite a bit to get the retract working.

Is this a Bol Models fuselage with a revised retract design?

Also, those magnets are so strong that after 20+ removals of the canopy front, it is hard to not end up breaking the plastic mount that the magnets are attached to.

Other than that, the fuselage works pretty well for me and is still flying - if only I had the time to go to the flying field!

[HeliDirect]

this is not Bol Models fuselage. This is made by other manufactures. The retract works perfectly and the manfucture is going to upgrade it to ball bearing retract as well. Really impress to see it flying and the retract just does some zip zap on the air. Very nice.

Steve

[Hoverup]

this is not Bol Models fuselage. This is made by other manufactures. The retract works perfectly and the manfucture is going to upgrade it to ball bearing retract as well. Really impress to see it flying and the retract just does some zip zap on the air. Very nice.

Steve
Now tell us it's not from Thailand. :)

[BellX1]

Will this fit the 347mm extended boom?

[HeliDirect]

Boyd,

I didn't say that :D

Steve

[Hoverup]

Boyd,

I didn't say that :D

Steve

I got a $100.00 bill here that says it is the exact same type of fuselage that Bol Models sold me about 4 months ago. Show us a picture of the landing gear plate and what they have done to lighten it from the heavy as lead slab of Lucite blue plastic that came in mine.
Hope I am wrong, but I don't think so. Also hope they pack yours better for shipping then they did to any of us early adopter, direct buyers. Suggest you inspect everyone you get for damage before you send them on to your customers.

Cheers - Boyd;)

[HeliDirect]

Boyd,

You say I am lying to you?

If I get from Bol Models, I'll say I get from them. If I get from others I tell you I get from others. No need to lie here. I do real business not lying others to benefit from others.

Let me get them in then I will be able to tell you what you want to see.

Steve

[Hoverup]

Whoooooooooo said you were lying?:) I just don't think you know what you have coming and some of us already have them and have had problems with the packing and the design.

[Tonystott]

Hmmm, is that big dent in the exhaust part of the "airbrush for realistic"? Or is it the result of some sub-standard packaging for shipment.

[HeliDirect]

Boyd,

I haven't seen the Bol Models fuselage yet but I know this manufacture. They are new but are good people, they fly well and fix the problems well. They do not release it if it is not good enough to release. I am sure they can pack them well too.

They are also the manufacture for these air brush canopies that I will carry next week too, check them out..

http://www.helidirect.com/images/Cano-Dragon-FL-S.jpg http://www.helidirect.com/images/Cano-Dragon-FR-S.jpg http://www.helidirect.com/images/DeadThunder-s.jpg http://www.helidirect.com/images/Fun-Universe-FL-S.jpg
http://www.helidirect.com/images/London-Fog-FL-S.jpg

maybe it's just like ALIGN and ARK :D

[HeliDirect]

and also Raptor Airwolf is also coming too... also from this manufacture.

thanks, i will check them first to make sure they are in good shape before shipping to end users.

Steve

[darthdrk]

Hmmmm Mabey its the Anmodel Bell222 basically the same as the Bolmodel. Its still from Thailand. I think the guy that made the Bolmodel222 is working for Anmodel now(Not my words but theirs) :)

[Pure Platinum03]

I hear all sorts of bad experiences buying from Thailand.....

[HeliDirect]

We make sure we choose the right manufacture and right products and we ship and support customers right from the states so you got all the service you need.

Steve

[Giglimesh]

Hmm...

[Hoverup]

http://www.rcgroups.com/forums/showthread.php?t=443540

[luc]

well, helidirect says it is not bomodel, so I believe them. At the end, who cares about the manufacturer if the quality (and packing) are good?
Personally I would prefer an already painted fuse, ready for use.
Btw those other canopies are gorgious.
I will keep this helidirect address in my favorites and come back some time later...

[p4ddy]

Wow! that's my fuselage. I have that on my rex & it's Kools Trading who made it. I got it for xmas & it cost me double that price. Hey, hoverup will remember me buying it lol. Magnets are strong enough to lift a car. Sorry to post in a VERY OLD thread....... & i wish i hadn't seen this because it reminds me of inflation.