Robbe Comtesse Instructions

[sander.bijl@gmail.com]

Hello all,

As a somewhat experienced builder, I decided to move over to the
sailing business: I recently became the proud owner of an assembled
Robbe Comtesse. The hull was somewhat damaged, but I managed to fix
that quite well.

But I'm running into a little problem: My ship did not come with an
instruction. I just got the boat and the fitting set, and that was all.

Is there a way in which anyone can help me obtian those instructions?
Or point me in the right direction?

Thanx in advance for your time!

Sander
The Netherlands

[A.T.]

Some information at
http://www.rchobby.co.uk/robbe_sailing-boat_comtesse.html
A lot of model boat building, running and sailing information for non RC
and RC electric, gas, sail and steam ships etc available at Alan's Hobby,
Model & RC Web Links
http://homepages.ihug.co.nz/~atong/
sub section =
Boats, Yachts, Submarines, Warship Combat and Nautical reviews
especially under
"Reviews, Plans, FAQ & Tips, Jet drive."

Billing Model Boats - Construction tips & Paint cross reference
FAQ - Ship Models
Boating Rope Knots - animated examples
Fishing Knots & Rigging - animated examples
Fitting servos to yachts, boats_ amend Servos to operate 180 or 360 degrees
How to Sail fast_ Rig tuning by Bob Sterne
Jet drive units (KMB)
Model Builder Tips & Tricks - Art of the Model Builder
Model testing - instrumentation, scaling laws, test tanks, wind tunnels,
experiments
Props & Shafts - & many other builders tips.***
RC Laser RC Sailboats - Tips and Tricks
RC Sailboat FAQ
rcboat.com - RC Website for the RC Racer. Home of The Engine Analysis Softwa
River boats,Towboats etc. - Old River Bill's RC***
River Boats, Towboats etc - Towboat Joe.
Tips, Set Up Info & Projects - Off shore electrics


regards
Alan T
Alan's Hobby, Model & RC Web Links
http://homepages.ihug.co.nz/~atong/
.................................................. ................



<sander.bijl@gmail.com> wrote in message
news:1130753986.634731.16150@f14g2000cwb.googlegro ups.com...
> Hello all,
>
> As a somewhat experienced builder, I decided to move over to the
> sailing business: I recently became the proud owner of an assembled
> Robbe Comtesse. The hull was somewhat damaged, but I managed to fix
> that quite well.
>
> But I'm running into a little problem: My ship did not come with an
> instruction. I just got the boat and the fitting set, and that was all.
>
> Is there a way in which anyone can help me obtian those instructions?
> Or point me in the right direction?
>
> Thanx in advance for your time!
>
> Sander
> The Netherlands
>