thekingofmice
Oct 24, 2005, 05:45 PM
For all you guys wanting to build the speed controllers & camera switches discussed on the board, that use the programmable chips:
I have a nearly brand new DV164101 Pic Flash programming kit. It connects to your pc's USB port for programming. It programs 8-14 pin chips. I have several chips to go with it, mostly 12f675's. I also have the add-on daughterboard (never used) that is an accessory for it.
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010053
I have Elabtronic's Programming software. You don't need to know anything about programming to program the chips with this program. It is icon based, and is purely "drag and drop." No typing needed except for putting a few numbers in. Tutorials are available on website to learn how to use it. Not necessesary in order to program chips, if you want to learn the programming language, but this makes it very simple.
http://www.elabtronics.com/products_cat_CoreChart.htm
I also have the elabtronics e-racer robot kit. Untouched, still in package. Just assemble, and plug into computer to program. Can be programmed to do all kinds of stuff. Everything is there.
http://www.elabtronics.com/products_cat_eracer.htm
Everything together (and shipping) cost me over $275 new. Will sell just the programmer and software for $110 by itself, & robot kit by itself for $60. If you want EVERYTHING, I will sacrifice all for $150.
I really need to sell, but might consider trade for GPS or metal detector OEV.
I have a nearly brand new DV164101 Pic Flash programming kit. It connects to your pc's USB port for programming. It programs 8-14 pin chips. I have several chips to go with it, mostly 12f675's. I also have the add-on daughterboard (never used) that is an accessory for it.
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010053
I have Elabtronic's Programming software. You don't need to know anything about programming to program the chips with this program. It is icon based, and is purely "drag and drop." No typing needed except for putting a few numbers in. Tutorials are available on website to learn how to use it. Not necessesary in order to program chips, if you want to learn the programming language, but this makes it very simple.
http://www.elabtronics.com/products_cat_CoreChart.htm
I also have the elabtronics e-racer robot kit. Untouched, still in package. Just assemble, and plug into computer to program. Can be programmed to do all kinds of stuff. Everything is there.
http://www.elabtronics.com/products_cat_eracer.htm
Everything together (and shipping) cost me over $275 new. Will sell just the programmer and software for $110 by itself, & robot kit by itself for $60. If you want EVERYTHING, I will sacrifice all for $150.
I really need to sell, but might consider trade for GPS or metal detector OEV.