brushless powered race boat for sale

[EGRESSor]

http://photos.fotango.com/p/eba00514330f00000001.jpg
http://photos.fotango.com/p/eba00514330f00000002.jpg
http://photos.fotango.com/p/eba00514330f00000004.jpg

name Gozilla evo 1 xxl
1 step epoxy glas hull
lenght 23.6"
stainless prop shaft
stainless ball bearings
stainless rudder and turnfin , sharp like razorblades
Futaba servo
watercooled brushless set Aveox RC7 motor and L160RC controller
7 carbon props K34.5 , 2x K36 , K36/3 , S36 , K37.5 , K39/3
its fast , 40mph @7 cells :twisted:
easy to handle , self righting after flips :mrgreen:

all you need is a transmitter , receiver and 6 or 7 or 8 cell pack
and lots of water :flipoff:

$350

for some prop info http://www.offshoreelectrics.com/forsale_props.htm
the hull http://206.206.85.209/xtdoc/Details.aspx?ProductCode=GOZWHS1&store=xtdoc

[jfint]

How many amps does this motor pull? What cells were you running? What was your runtime?

[EGRESSor]

How many amps does this motor pull? What cells were you running? What was your runtime?

the motor pulls about 25-30 amps , depends on smooth or rough water and cog and prop
the runtime with 7 3300mah cells , prop 37.5mm and light rough water is 6 minutes

[EGRESSor]

some more pics
http://photos.fotango.com/p/eba00512214f00000016.jpg
http://photos.fotango.com/p/eba00512214f00000017.jpg
http://photos.fotango.com/p/eba00512214f00000018.jpg
http://photos.fotango.com/p/eba00512214f00000019.jpg
http://photos.fotango.com/p/eba00512214f00000020.jpg

the underside of the hull is sanded

[EGRESSor]

now its here (http://cgi.ebay.com/BRUSHLESS-POWERED-RACE-BOAT-epoxy-glass-NO-abs_W0QQitemZ6010929573QQcategoryZ2564QQrdZ1QQcmdZ ViewItem)

[raz]

PM sent

[Eibo Morakinaga]

still avail? PM me if so