PDA

View Full Version : Crystals Problem


cncshaper
Sep 28, 2005, 05:00 PM
I am looking for crystals for an old ACE Micropro8000 on 53.500Mhz FM.
Not sure if I need Single or Dual conversion.

Miami Mike
Sep 28, 2005, 06:39 PM
If it's a transmitter, there's no conversion involved. Single conversion and dual conversion are terms that apply to receivers.

And by the way, welcome to RCGroups.com!

ZAGNUT
Sep 28, 2005, 07:45 PM
Marv at www.jensenjetmodels.com sells the new FM RF decks for this radio and should have the crystal you need. FMA might also still have them in stock.

if you don't have any luck there then join the micropro group at http://groups.yahoo.com/group/MP8K/ and post a message. while you're at it you can also pick up an EEPROM with the brand new firmware version that just came out....just don't call the micropro "old" while you're there...



dave

cncshaper
Sep 29, 2005, 03:21 PM
Sorry, I should have said I was looking for RX crystals.
Thanks for the reply's, I will have a look at the ACE MicroPro 8000 group as well. :)