realdeal
Sep 26, 2005, 05:02 PM
Stuff We Like Inc. is proud to introduce the 2207 DIY kit to US dealers and customers. We have re-written the instructions so that even a first-time DIY builder should get through it with ease in just a couple of hours. Dealers will be happy to know that these kits are packaged and ready for retail display.
Following on the heels of the incredibly successful Apex Mini 300 we are proud to introduce the Rocket 2207 DIY Outrunner. Easier assembly, more power, more mounting options and more colors make this the cream of the crop in DIY brushless motors.
This motor can provide more power than a "speed 400" motor at about 1/2 the weight. The new design will make it easier to wind the motor for larger props. The typical range of windings will provide a 6-12A draw on 5-10" props.
Once you see how easy and cost effective it is to build your own DIY brushless motors you may never buy pre-built again!
This kit includes:
Steel Bell with installed super-strong magnets
9 pole lacquer insulated stator
0.32 mm wire (enough for two winding sessions)
2.0mm Shrink tube for the wire
2.4mm Gold Connectors for ESC to Motor connection
4.0mm Shrink tube for the connectors
Hardened steel motor shaft witch C-clip retainer
2x ball bearings
Mounting screws
Specs:
Diameter - 28mm
Weight - 32.5g
Shaft size - 3mm
Mounting Pattern(s) - 16 mm and 19mm by M3
Stator dimensions - 22x7mm
List Price - $39.99
Street Price - $29.99
Dealer inquiries invited!
Web link: http://www.stuffwelike.net/store/product.php?productid=16464&cat=0&page=
Following on the heels of the incredibly successful Apex Mini 300 we are proud to introduce the Rocket 2207 DIY Outrunner. Easier assembly, more power, more mounting options and more colors make this the cream of the crop in DIY brushless motors.
This motor can provide more power than a "speed 400" motor at about 1/2 the weight. The new design will make it easier to wind the motor for larger props. The typical range of windings will provide a 6-12A draw on 5-10" props.
Once you see how easy and cost effective it is to build your own DIY brushless motors you may never buy pre-built again!
This kit includes:
Steel Bell with installed super-strong magnets
9 pole lacquer insulated stator
0.32 mm wire (enough for two winding sessions)
2.0mm Shrink tube for the wire
2.4mm Gold Connectors for ESC to Motor connection
4.0mm Shrink tube for the connectors
Hardened steel motor shaft witch C-clip retainer
2x ball bearings
Mounting screws
Specs:
Diameter - 28mm
Weight - 32.5g
Shaft size - 3mm
Mounting Pattern(s) - 16 mm and 19mm by M3
Stator dimensions - 22x7mm
List Price - $39.99
Street Price - $29.99
Dealer inquiries invited!
Web link: http://www.stuffwelike.net/store/product.php?productid=16464&cat=0&page=