4-in-1 for HoneyBee CP2 problems

[Sidney H Bridge]

I'm pretty sure the original 4-in-1 is toast! The servos move all of
their own accord, very wildly. I've checked the crystals are seated
properly. If I hold the antenna cable then it works fine. Seems to me
that the receiver is buggered. Any ideas, or suggestion for a
replacement, would be most welcome.

This is my first heli, so any help will be very gratefully received!

--

Sid

[J McKernan]

I had a similar issue with my Blade CP. Checked the crystals and they were
seated properly, etc. Turns out is was a bad crystal set. Cruise down to
the local hobby shop and see if they have a crystal set that they can
substitute in and test with. My LHS was kind enough to loan me a set of
crystals while I waited for Horizon Hobby to send me a replacement set.

Good luck.

Jake

"Sidney H Bridge" <s_h_b_1970@hotmail.com> wrote in message
news:7PVYe.1591$NO2.788@newsfe4-win.ntli.net...
> I'm pretty sure the original 4-in-1 is toast! The servos move all of their
> own accord, very wildly. I've checked the crystals are seated properly. If
> I hold the antenna cable then it works fine. Seems to me that the receiver
> is buggered. Any ideas, or suggestion for a replacement, would be most
> welcome.
>
> This is my first heli, so any help will be very gratefully received!
>
> --
>
> Sid

[NONNE]

Sidney H Bridge wrote:
> I'm pretty sure the original 4-in-1 is toast! The servos move all of
> their own accord, very wildly. I've checked the crystals are seated
> properly. If I hold the antenna cable then it works fine. Seems to me
> that the receiver is buggered. Any ideas, or suggestion for a
> replacement, would be most welcome.
>
> This is my first heli, so any help will be very gratefully received!
>
> --
>
> Sid

Try to email thsi Hobby Shop - HobbyJapan2000.com, their support may be
able to help you with your problem.

[Sidney H Bridge]

NONNE wrote:
> Sidney H Bridge wrote:
>
>>I'm pretty sure the original 4-in-1 is toast! The servos move all of
>>their own accord, very wildly. I've checked the crystals are seated
>>properly. If I hold the antenna cable then it works fine. Seems to me
>>that the receiver is buggered. Any ideas, or suggestion for a
>>replacement, would be most welcome.
>>
>>This is my first heli, so any help will be very gratefully received!
>>
>>--
>>
>>Sid
>
>
> Try to email thsi Hobby Shop - HobbyJapan2000.com, their support may be
> able to help you with your problem.
>


Will do, thanks.