Sky HawK
Sep 22, 2005, 04:15 PM
Anyone seen this yet, or perhaps bought one? :D I'm not a big Duratrax fan, but it looks decent and comes better equiped than the Half8.
"The Vendetta offers the best of both worlds: the ease and completeness of a ready-to-run combined with the equipment of a race-ready competitor.
Aluminum performance parts inspired by 1/8 scale racing. Track-tunable oil-filled shocks. Adjustable wheelbase. A fully adjustable suspension. A complete set of ball bearings. It's fully optioned, and what's more - it's totally ready-to-run. The body's painted. The chassis is assembled. And there's nothing left to buy. Motor, ESC, battery and charger, radio and "AA" batteries - the Vendetta has it all, and it's all good to go now.
Performance Features:
Anodized Aluminum Shock Towers
Anodized Aluminum Front Brace
Anodized Aluminum Steering Drag Link
Anodized Aluminum Driveshaft
Anodized Aluminum Rear Hinge Pin Brace
Fully Adjustable Suspension - Camber, Castor, Wheelbase
Adjustable Oil-Filled Shocks with Aluminum End Caps
Multiple Shock Mounting Positions (4 front/6 rear)
Mounted Pin-spike Tires with Foam inserts mounted on racing rims
Front and Rear Differentials
Shaft-driven 4WD
Complete Ball Bearings
Gear Cover fully encloses the pinion and spur gear
Two-Position Adjustable Wing
Convenience Features:
Fully Assembled and Ready-To-Run
2-Channel 75 MHZ Radio by Futaba
SX-100 Steering servo and RX-100 Receiver
High RPM 380 Motor
ESC5000 Electronic Speed Control with reverse
7.2V 600mAh NiCd battery and AC charger
6 different body colors to choose from
8 "AA" batteries for TX
Specs:
Length: 10.25 in (260mm)
Width: 6.375 in (160mm)
Height: 3.625 in (95mm)
Weight (approx.): 23.5 oz (665g) "
"The Vendetta offers the best of both worlds: the ease and completeness of a ready-to-run combined with the equipment of a race-ready competitor.
Aluminum performance parts inspired by 1/8 scale racing. Track-tunable oil-filled shocks. Adjustable wheelbase. A fully adjustable suspension. A complete set of ball bearings. It's fully optioned, and what's more - it's totally ready-to-run. The body's painted. The chassis is assembled. And there's nothing left to buy. Motor, ESC, battery and charger, radio and "AA" batteries - the Vendetta has it all, and it's all good to go now.
Performance Features:
Anodized Aluminum Shock Towers
Anodized Aluminum Front Brace
Anodized Aluminum Steering Drag Link
Anodized Aluminum Driveshaft
Anodized Aluminum Rear Hinge Pin Brace
Fully Adjustable Suspension - Camber, Castor, Wheelbase
Adjustable Oil-Filled Shocks with Aluminum End Caps
Multiple Shock Mounting Positions (4 front/6 rear)
Mounted Pin-spike Tires with Foam inserts mounted on racing rims
Front and Rear Differentials
Shaft-driven 4WD
Complete Ball Bearings
Gear Cover fully encloses the pinion and spur gear
Two-Position Adjustable Wing
Convenience Features:
Fully Assembled and Ready-To-Run
2-Channel 75 MHZ Radio by Futaba
SX-100 Steering servo and RX-100 Receiver
High RPM 380 Motor
ESC5000 Electronic Speed Control with reverse
7.2V 600mAh NiCd battery and AC charger
6 different body colors to choose from
8 "AA" batteries for TX
Specs:
Length: 10.25 in (260mm)
Width: 6.375 in (160mm)
Height: 3.625 in (95mm)
Weight (approx.): 23.5 oz (665g) "