Astro 035 Texaco brush motor

[Michael McIntyre]

This message from "Michael McIntyre" <mgmrcfly@Route24.net> brought to you by EFLIGHT!

Hello all,
I was given a Astro 035 Texaco brush motor. It looks like a
regular Astro 035 FAI motor but on the box it says it has 28
winds and has a Astro 2.33:1 gearbox.
What I am looking for is the motor's Kv, Izero, and Rm so I
can add it to my MotoCalc program. I already looked in my
MotoCal program and it is not included in the motor listing.

Thanks,
Mike McIntyre



*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm

[Greg Gimlick]

This message from Greg Gimlick <greggimlick@earthlink.net> brought to you by EFLIGHT!

Michael McIntyre wrote:

> I was given a Astro 035 Texaco brush motor. It looks like a regular
> Astro 035 FAI motor but on the box it says it has 28 winds and has a
> Astro 2.33:1 gearbox.
> What I am looking for is the motor's Kv, Izero, and Rm

I can't guarantee this is the exact one, but these are the numbers for
the FAI 035G that I have
Kv 3226
Io 3.0
Rm 32 mohm

There was also one designated as a 604P, but it was for planetary gears
and was a much higher Kv motor at 4285 so I doubt it was ever mated with
the 2.33 box.
--
Take care,
Greg

*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm

[Doug Ingraham]

This message from Doug Ingraham <dpi@rapidnet.com> brought to you by EFLIGHT!

On Wed, 14 Sep 2005, Michael McIntyre wrote:

> This message from "Michael McIntyre" <mgmrcfly@Route24.net> brought to you by EFLIGHT!
>
> Hello all,
> I was given a Astro 035 Texaco brush motor. It looks like a
> regular Astro 035 FAI motor but on the box it says it has 28
> winds and has a Astro 2.33:1 gearbox.
> What I am looking for is the motor's Kv, Izero, and Rm so I
> can add it to my MotoCalc program. I already looked in my
> MotoCal program and it is not included in the motor listing.

Kv = 1264
Io = 1.0
Rm = 0.193

I have one of these and I measured the constants a long time ago.

Doug Ingraham
Rapid City, SD USA



*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm

[Michael McIntyre]

This message from "Michael McIntyre" <mgmrcfly@Route24.net> brought to you by EFLIGHT!

Doug,
Thanks for the motor constants!

Mike McIntyre


*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm