JR Radio

[R A]

Please does anyone know how to get a JR radio X2610 to work with an electric
Esky honey bee 2 is does have a ccpm facility but I cant get them to talk to
each other.

Rob

[Funfly3]

I have tried with a Futaba set and failed, I believe the Esky its a PCM set
up which will only work with the Esky tx
"R A" <mgroverelectronics(remove)@btinternet.com> wrote in message
news:ddupri$jfp$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...
> Please does anyone know how to get a JR radio X2610 to work with an
> electric Esky honey bee 2 is does have a ccpm facility but I cant get them
> to talk to each other.
>
> Rob
>
>

[HELIJR2USA@inmail24.com]

Is this the helicopter you got -
http://www.hobbyjapan2000.com/store/proddetail.php?prod=ESKY3D6B ??

I can use it with my JR transmitter, I just change the receiver

[Rob]

Yes that's the one but not the 2005 version, what do you mean by just
changing the receiver as it part of the 4 in 1 or do you mean the crystal in
the receiver ? thanks Rob

<HELIJR2USA@inmail24.com> wrote in message
news:1124396678.098306.38800@g14g2000cwa.googlegro ups.com...
> Is this the helicopter you got -
> http://www.hobbyjapan2000.com/store/proddetail.php?prod=ESKY3D6B ??
>
> I can use it with my JR transmitter, I just change the receiver
>

[Moby]

My understanding is you cannot use a JR/Futaba/etc transmitter with
the receivers that come with the Esky/Dragonfly/etc.

The receivers that come with the helis usually have speed controller,
and sopmetimes gyro, built in.

To use your JR, you need to replace the receiver in the heli with a
compatable receiver, add a speed controller and a gyro (if the heli
does not already have separate ones)

On Wed, 17 Aug 2005 07:43:46 +0000 (UTC), "R A"
<mgroverelectronics(remove)@btinternet.com> wrote:

>Please does anyone know how to get a JR radio X2610 to work with an electric
>Esky honey bee 2 is does have a ccpm facility but I cant get them to talk to
>each other.
>
>Rob
>


Regards,

Moby

================================================== =================
Alan Stuart downunder in Perth, Oz
Email: newsgroups@NOSPAM.AND.EGGS.moby58.com
Homepage: http://www.moby58.com
Local Weather: http://mobywx.ozflightsim.com/wx
Stuff for sale: http://www.moby58.com/forsale


* Remove NOSPAM.AND.EGGS. from email address for replies.

And just to try and stop spammers:
tosspam@aol.com, abuse@aol.com, abuse@yahoo.com, abuse@hotmail.com,
abuse@msn.com, abuse@sprint.com, abuse@earthlink.com, uce@ftc.gov,
spamcop@spamcop.net

Making life REAL hard for spammers with:
http://members.iinet.net.au/~shades2/spamtrap.html

[Mark Smith]

Moby wrote:
>
> My understanding is you cannot use a JR/Futaba/etc transmitter with
> the receivers that come with the Esky/Dragonfly/etc.
>
> The receivers that come with the helis usually have speed controller,
> and sopmetimes gyro, built in.
>
> To use your JR, you need to replace the receiver in the heli with a
> compatable receiver, add a speed controller and a gyro (if the heli
> does not already have separate ones)
>
> On Wed, 17 Aug 2005 07:43:46 +0000 (UTC), "R A"
> <mgroverelectronics(remove)@btinternet.com> wrote:
>
> >Please does anyone know how to get a JR radio X2610 to work with an electric
> >Esky honey bee 2 is does have a ccpm facility but I cant get them to talk to
> >each other.
> >
> >Rob
> >
>
> Regards,
>
> Moby
>
> ================================================== =================
> Alan Stuart downunder in Perth, Oz
> Email: newsgroups@NOSPAM.AND.EGGS.moby58.com
> Homepage: http://www.moby58.com
> Local Weather: http://mobywx.ozflightsim.com/wx
> Stuff for sale: http://www.moby58.com/forsale
>
> * Remove NOSPAM.AND.EGGS. from email address for replies.
>
> And just to try and stop spammers:
> tosspam@aol.com, abuse@aol.com, abuse@yahoo.com, abuse@hotmail.com,
> abuse@msn.com, abuse@sprint.com, abuse@earthlink.com, uce@ftc.gov,
> spamcop@spamcop.net
>
> Making life REAL hard for spammers with:
> http://members.iinet.net.au/~shades2/spamtrap.html


I am told the Futaba radio is in fact compatible with the Blade four in
one unit.

You need a transmitter that has the CCPM available too.

Check on http://runryder.com under the Blade forum for more info,
actually more than you can imagine,,,,,,,,,,,
--
Mark Smith
Tri-State Kite Sales
1121 N Locust St
Mt Vernon, IN 47620
1-812-838-6351
http://www.trikite.com
mailto:mark@trikite.com

[Beav]

"Moby" <newsgroups@moby58.com> wrote in message
news:eg5ag19hv50bmmcskbneumrk6m039pnaur@4ax.com...
> My understanding is you cannot use a JR/Futaba/etc transmitter with
> the receivers that come with the Esky/Dragonfly/etc.
>
> The receivers that come with the helis usually have speed controller,
> and sopmetimes gyro, built in.

That wouldn't be the issue.
>
> To use your JR, you need to replace the receiver in the heli with a
> compatable receiver, add a speed controller and a gyro (if the heli
> does not already have separate ones)

This would be true IF the receiver was a PCM system not PPM. If it's PPM,
then the JR (or just about any other) Tx which has CCPM capabilites will do
the job.


--
Beav

Reply to "beavis dot original at ntlworld dot com" (with the obvious
changes)