Dave Lauck
Jul 19, 2005, 04:23 PM
More fun flying, less time fixing!
High-quality carbon fiber parts add rigidity while keeping overall
weight to a minimum.
* The wing and fuselage are made of Depron material that's 1.3mm
thick * which bends more and resists breaking much better than the
thicker Depron used in other foam flyers.
* Includes a spine down the center of the fuselage for added
durability.
* Printed trim scheme on fuselage, wings and wing struts reduces
flying weight.
Low wing loading and a flying weight of only 8 ounces allows the Radix
3D to virtually float through aerobatics at walking speeds.
* Can be flown inside a large building, or outdoors in a
backyard, park or sports field.
* Available with the Ultrafly B-Series brushless motor, or
upgrade to brushless!
SPECIFICATIONS
* Wingspan: 28.3 in (720mm)
* Wing Area: 313 sq in (20.2dmē)
* Flying Weight: 8 oz (230g)
* Length: 30 in (760mm)
* Requires: 4-channel radio w/3 micro servos, brushless ESC (10A
min.), 11" Slo-Flyer prop, 2S Lithium-Polymer battery pack, Li-Po
compatible charger, foam-safe CA adhesive (UFLA1109 also requires a
brushless motor)
UFLA1109 Radix 3D Competition ARF
Retail $69.99
Street 59.99
UFLA1110 Radix 3D Competition ARF w/B/06/12 Brushless Motor
Retail $139.99
Street 99.99
Due in stock mid-August
High-quality carbon fiber parts add rigidity while keeping overall
weight to a minimum.
* The wing and fuselage are made of Depron material that's 1.3mm
thick * which bends more and resists breaking much better than the
thicker Depron used in other foam flyers.
* Includes a spine down the center of the fuselage for added
durability.
* Printed trim scheme on fuselage, wings and wing struts reduces
flying weight.
Low wing loading and a flying weight of only 8 ounces allows the Radix
3D to virtually float through aerobatics at walking speeds.
* Can be flown inside a large building, or outdoors in a
backyard, park or sports field.
* Available with the Ultrafly B-Series brushless motor, or
upgrade to brushless!
SPECIFICATIONS
* Wingspan: 28.3 in (720mm)
* Wing Area: 313 sq in (20.2dmē)
* Flying Weight: 8 oz (230g)
* Length: 30 in (760mm)
* Requires: 4-channel radio w/3 micro servos, brushless ESC (10A
min.), 11" Slo-Flyer prop, 2S Lithium-Polymer battery pack, Li-Po
compatible charger, foam-safe CA adhesive (UFLA1109 also requires a
brushless motor)
UFLA1109 Radix 3D Competition ARF
Retail $69.99
Street 59.99
UFLA1110 Radix 3D Competition ARF w/B/06/12 Brushless Motor
Retail $139.99
Street 99.99
Due in stock mid-August