Dennis
Jul 14, 2005, 09:11 AM
I have a csm 180 gyro on my JR Vventure 50 and I am experiencing the
following trouble.
I cant get the heli to stay pointed in 1 direction,the tail will 9 times out
of 10 wag its way around to the left or the right,depending on my trim
setting. I have the heli stting on the desk and have the gyro at full adjust
and the transmitter gyro setting at 100% and the tail servo is chattering
back and forth.Now if I set the transmitter to 0% and the gyro to minimum it
still does it.Doesnt seem to make any difference where I set either it still
chatters,only about 1 mm either way but I think this is enough to cause the
wagging effect. I have a csm 200 headlocking gyro and digital servo coming
soon and this will tell me if my current gyro is faulty or not as well as
hold my heli straight for a change.
Any comments or suggestions?
Dennis
following trouble.
I cant get the heli to stay pointed in 1 direction,the tail will 9 times out
of 10 wag its way around to the left or the right,depending on my trim
setting. I have the heli stting on the desk and have the gyro at full adjust
and the transmitter gyro setting at 100% and the tail servo is chattering
back and forth.Now if I set the transmitter to 0% and the gyro to minimum it
still does it.Doesnt seem to make any difference where I set either it still
chatters,only about 1 mm either way but I think this is enough to cause the
wagging effect. I have a csm 200 headlocking gyro and digital servo coming
soon and this will tell me if my current gyro is faulty or not as well as
hold my heli straight for a change.
Any comments or suggestions?
Dennis