RCEPac 16x64K (clonepac)

[chris101]

Hi All.

I have made this new type of clonepac, that I just wanted to show you all, is consist of 16 X 64K individual pac's in one, which can be used in the same transmitter or in 16 different ones. It has a dual 7 segment that shows what section is active, and it is possible to disable a section completely for backup purposes. The button on the right is used to access the "menu" where you can change the section.
Here is some pics.

Best regards from.

Chris101

[Malc C]

very nice, any internal pictures so we can see your real handywork ;)

[lazy-b]

Very Nice Jobs........I have a Futaba 9CHP......Hope you can share your work.

You Just give me a Good idea, of adding additional telemetry data on my transmitter, I was thinking of using the additional 3 Digit LED display to monitor the Receiver Battery Voltage.

can use extra channel say channel 8, to make an adjustable Voltage Reading of 4.50 to 5.50 display on 3 Digit LED display. and a single LED located on your plane or Helicopter, will just indicate a Higher or Lower than your SET POINT, i.e. if its LIGHT UP this means is Higher than your SET POINT.

As you fly your Plane/Helicopter, adjust the Channel 8 KNOB until you get the LED in the EDGE of ON and OFF, then Reading on 3 Digit LED will be your actual Receiver Battery Voltage.

[chris101]

Hi.

Here is a picture of the internals :)

I can't share my work, but you can buy one.

1 RcePac without box $99
1 RcePac with box $121

I have used allot of time to get this to work, so I'm not willing to just give my work away, also, the PCB is double sided, and is not easy to make yourself. Futhermore you need programming equipment to program the MCU, so the price to build one would exceeed the price above.

Hope this helps.

[simingx]

Wow, that's fancy! :D