GWS R4II - schematics

[gerad]

hy all
i want the schematics for a GWS T4II rc, i want to upgrade it to 6CH...

Tried google, nothing found...
Any help will be welcomed :D

Thanks in advance...

Cheers, Gerad

[jeffs555]

http://homepages.paradise.net.nz/bhabbott/circuits/GWS_4P.gif

The extra channels connect to pins 10-13 on the 74hc164

[gerad]

forgot to specify, i have 8CH on my receiver, i want to add the extra channels to the transmitter ..

so that link didnt help me with nothing, sorry, thanks anyway..

thanks

[gerad]

Please help with the GWS T4II (tx) schematics ..

[HLC-RCU]

http://homepages.paradise.net.nz/bhabbott/circuits/GWS_4P.gif

The extra channels connect to pins 10-13 on the 74hc164


Can one of the extra channels be used to work the throttle? I have a 4P on which the thottle channel doesn'twork :mad:

[AKACully]

Can one of the extra channels be used to work the throttle? I have a 4P on which the thottle channel doesn'twork :mad:

I bet you plugged your ESC on backwards. I fried my channel three that way. I chose to mod my transmitter by swapping the wires for the throtte and rudder. I don't use them other than as a pair.

Cully

[sesat]

Where do I tap to get the PPM train?

Ram

[vintage1]

Pin 9 of the 1136, in raw analogue form, or squared up a bit, the comparator output. (pin 4 of the 47 chip)