Trinity F3B Setup help needed , please

[adriaan]

Greetings all

Is there anybody that could please help me with the recommended setup for the F3B Trinity

Even just the initial CG settings would be a great help but of course all settings would be appreciated

Many thanks and happy landings

[dhauch]

hi,
i've built a couple of them, start with the c/g at 40%, then you can fine tune for your liking from there.
throws are more or less personal how you like them.
a good starting point for aileron differential is 3 to 1.
mix flaps to ailerons 30% to 40%.

hope this helps some.

dh

[adriaan]

Thank you DH

That was all I needed

[MDM]

I would be interested in your final CG and throws when you finish, thanks.

Also, did you make an adjustable hook or just put it where they made the hole ?

MDM

[dhauch]

that hole for the tow hook sits back pretty far, it's around 45% of the chord of the wing.
i used that for the rear of the slot and went forward from there when i made the slot for a adjustable hook.

dave hauch
www.git-r-built.com