sierraerik
Apr 08, 2005, 02:38 PM
SIERRA HOBBY ANNOUNCES THE RELEASE OF NEW INTERLOCKING COLLET PROP ADAPTERS
If you have had problems with collet style prop adapters in the past check out the NEW line of PERFECT PROP ADAPTERS from www.SierraHobby.com (http://www.sierrahobby.com)
Following are the benefits:
Perfect Design - Interlocking Design. The collet ring locks into the prop shaft, eliminating all slippage between them, making the tightening process easier.
Perfect Wrench - Holding the back side collet. – The Perfect Wrench was designed to hold the collet ring right behind the prop so you can achieve the perfect amount of clamping force. (Your prop won’t fall off in flight.) The thickness of the Perfect Wrench matches the width of the collet shoulder allowing the user to set the exact spacing between prop and cowling.
Perfect Diameters – All Perfect Prop Adapters were engineered to fit APC prop bushings perfectly. No home made bushings or extra reaming is/are required with Perfect Prop Adapters.
Perfect Spacing – All Perfect Prop Adapters have enough spacing for the most common spinner backplates and propellers. You will never need to use extra washers to take up a gap, or run out of threads trying to hold your system together.
Please contact me for more information.
Erik Lantz
www.SierraHobby.com (http://www.sierrahobby.com)
If you have had problems with collet style prop adapters in the past check out the NEW line of PERFECT PROP ADAPTERS from www.SierraHobby.com (http://www.sierrahobby.com)
Following are the benefits:
Perfect Design - Interlocking Design. The collet ring locks into the prop shaft, eliminating all slippage between them, making the tightening process easier.
Perfect Wrench - Holding the back side collet. – The Perfect Wrench was designed to hold the collet ring right behind the prop so you can achieve the perfect amount of clamping force. (Your prop won’t fall off in flight.) The thickness of the Perfect Wrench matches the width of the collet shoulder allowing the user to set the exact spacing between prop and cowling.
Perfect Diameters – All Perfect Prop Adapters were engineered to fit APC prop bushings perfectly. No home made bushings or extra reaming is/are required with Perfect Prop Adapters.
Perfect Spacing – All Perfect Prop Adapters have enough spacing for the most common spinner backplates and propellers. You will never need to use extra washers to take up a gap, or run out of threads trying to hold your system together.
Please contact me for more information.
Erik Lantz
www.SierraHobby.com (http://www.sierrahobby.com)