View Full Version : Question airtronics radio setup for legend
kralcniloc
Mar 13, 2005, 07:18 PM
i have a airtronics legend and an airtronics rd6000, and i was wondering if any one could help me out setting up my radio. the airplane is full house, and i want crow, and camber. one other thing i need help with is doing all the flap mixing so it uses the throttle stick instead of the flap switch.
thanks.
-Colin
aeajr
Mar 18, 2005, 09:51 PM
I do not own that radio, but i was just looking at tower hobbies for the listing.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWV45**&P=7
Look for this function, CR-LA/RA, in your manual. That is crow. I presume it also provides elevator compensation.
CR-LA/RA: Ailerons go up when flaps go down both L & R are adjustable
ADVANCED Program Features for Aircraft
All Features Listed In BASIC, Plus...
EXP: Linear movement of the servo to the relation of stick movement.
TRM: LCD provides indicator of value & direction of trim.
MSL: Select up to 4 models
NAM: Use up to 3 letters to name models
SW-R: Reverse to default direction of all control switches.
CPY: Copy one model to another.
FLAPE: Activates 2 channels to be used for ailerons.
SPOIR: Both ailerons act as spoilers as throttle stick is used.
AI-DIF: Changes throw to aileron servos independently to stop bad yaw
DELTA: Ailerons also operate as elevators.(Great for Sailplanes)
V-TAIL: Rudder & elevator, used for V-Tail models
D/A-A: Dual rate alarm alerts you when dual rate switch is on.
T-CUT: User sets point where throttle can be cut.
C-MIX: Mixes master channel to another slave channel.
CR-LA/RA: Ailerons go up when flaps go down both L & R are adjustable
OPT: Advanced program allows function displays to be turned ON or OFF
STEP: Sets amount of servo movement with one beep of the trim.
FAIL: W/PCM RX, user can set default input if signal is lost.
BFS: W/PCM RX, brings throttle servo to idle if low voltage occurs.
BASIC: Turns Basic menu ON or OFF.
Look for this function, CR-LA/RA, in your manual. That is crow. I presume it also provides elevator compensation.
CR-LA/RA: Ailerons go up when flaps go down both L & R are adjustable
aeajr
Jun 03, 2006, 04:36 PM
i have a airtronics legend and an airtronics rd6000, and i was wondering if any one could help me out setting up my radio. the airplane is full house, and i want crow, and camber. one other thing i need help with is doing all the flap mixing so it uses the throttle stick instead of the flap switch.
thanks.
-Colin
Do you still have your Legend? Do you know what the wing incidence is supposed to be compared to the stab?
vBulletin® Copyright ©2000-2009, Jelsoft Enterprises Ltd.