Servo Connectors

[kybert]

Anyone know where i can mass-purchase the attached connector?

Its a servo connector, as used in GWS servos. I cannot find a supplier that can supply boxes of 1000 units at a time, so im looking for the manufacturer directly.


Joe

[Andrew0820]

You will likely have difficulty finding polarized connectors with a hood, however I use the following non-polarized housings and associated crimp pins for all battery, servo and switch connectors in our labs. All standard servo/battery/switches are on .100" centers.

Jameco Catalog Page (http://www.jameco.com/Jameco/catalogs/c251/P101.pdf)

[kybert]

I have a supplier of the one that i show in the picture, and they are currently cheeper than the jamesco connectors you posted; So im looking for a more direct supply, that is even cheeper again!

[Andrew0820]

they are currently cheeper than the jamesco connectors you posted;

I, too, am always looking for less expensive supplies -- please share.

Thanks,

andrew

[RMFISH]

This type of connector is used extensively to connect speakers and external displays on desktop computers. There are 1 pin, 2pin and three pin connectors used on the Mother board. I would suggest that you look for a computer supply company in your lacality. These connectors are quite cheap.
Robert.

[pic man]

if any one finds the direct distributor of these conectors please do post,, im begining a prouduction run , and will need quite a few as well, so far my onlyplace to aquire them is hobby shop,,,, 5$ per 2, unacceptable,, a link to where u guys are finding these would be sweeeeeeet

[Mr.RC-CAM]

so far my onlyplace to aquire them is hobby shop,,,, 5$ per 2, unacceptable,, a link to where u guys are finding these would be sweeeeeeetUnder $1 each: http://www.rcgroups.com/forums/showthread.php?t=232537

RC-CAM

[pic man]

awsome man ty much