View Full Version : Sophisticated lady Canopy
billrcpilot
Feb 02, 2005, 07:55 PM
:rolleyes: I've build't the canopy for the Sophisticated Lady and now debating if to attache the canopy to the fuselage using the rubber band as per the instructions,or do as GWS does with their canopy on the P-51D using magnets, my only concern is that the magnets would be above the receiver and i'm not sure if the would have any affect on the receiver :confused: if you have any idea's on this let me know, Thanks guy for all the information you have given me in the past in building the sailplane.
Bill
dephela
Feb 02, 2005, 09:27 PM
Magnets don't present any problem on my planes.
Radio Shack has smaller, more powerful magets that work well.
Dennis
billrcpilot
Feb 02, 2005, 11:30 PM
Thanks Dennis, i will look them up, Wife held me hostage and forced me to take her to her favorite fabric store and thats where i found these magnets. would like to find some Rare Earth Magnets.
Bill
Komet
Feb 03, 2005, 11:01 PM
Aircraft world has them as well. from 22 cents a peice and lots of different sizes. I use the 5 x 5 x 1 mm ones for holding down canopys, hatches and cowels and they work brilliantly. Normally I just mount one on a surface and a small peice of metal, like a snapped off bit of craft knife blade on the other.
Thermalin
Feb 04, 2005, 12:03 AM
You could always put the peg in back and the magnet in front.
Mike
kwmtrubrit
Feb 04, 2005, 12:07 AM
Hey Bill,
I got some rare earth magnets at radio shack. They are about 1/8th dia x 1/16th. Teeny tiny little suckers, but powerful, I got them for holding on a hatch and will probably use one with a piece of metal as already mentioned.
Keith
billrcpilot
Feb 05, 2005, 11:41 PM
Hey Bill,
I got some rare earth magnets at radio shack. They are about 1/8th dia x 1/16th. Teeny tiny little suckers, but powerful, I got them for holding on a hatch and will probably use one with a piece of metal as already mentioned.
KeithThanks Keith thank i heading for Radio Shack.
Bill
vBulletin® Copyright ©2000-2009, Jelsoft Enterprises Ltd.