T-Maxx

[spiderflyer]

Hello,

If anyone is reading this !!!! (LOL)

The T-maxx is the baddest Nitro Monster Truck Ever Made !!!!

If anyone has one or has questions on one, I would love to Talk...

Later - ... Spider

[shaunsmaxx]

Seems to be mostly for planes. LOL I have an e-maxx and I love it. I'm looking to go brushless and that's what brought me here. These trucks are great. I also have a nitro street force that I kinda set for offroad as well as on. I've just never been able to get it tuned right and then I found out the motor was shot so I bought a new. It's a blast also but I can't play with it ih the house. That's what I do with this http://community.webshots.com/rz/r1/9/1/62/29590162vdwiqfvnsu-ph.jpg.

[pure_gold]

i got a T and an E :)

pics of a few of my models, http://homepage.mac.com/icenw/index.htm


i'm kinda big on off roaders, the site only has a small selection of my collection of cars and trucks

[Glenn S.]

Hey pure gold,
Noticed your running the MIP stinger. Had one one my RC10-GT. And put the stock RC10 pipe on my HPI RS4. Well I wanted to see how the RS4 would run with the stinger. Gave it alittle more bottom end, but wouldn't even kick in the two speed tranny.
If you can fit a stock RC10 pipe on there, their only 12 bucks. Try it you might like it. I bought another stock pipe and threw the stinger in the tool box.

[T-Bo]

I have had my T for quite a while now.

It is hoped-up to the maxx ;)

Here is a list of what I have on it:

Strength/Safety adders:
-Failsafe
-3 piece Aluminum skidplate set (With full armor center skid)
-Ballistic Stupidity Servo Skidplate
-RPM Bulkhead braces
-Aluminum bumpers (used for show only)
-R/C Raven half-cage

Suspension:
-TMS Adjustable shock towers
-RPM Black A-Arms
-Lundsford Titanium turnbuckles and hinge pins
-Big Bore Shocks (60 Wt. Oil, Purple RPM 2 stage shock pistons)
-R/C Raven Progressive rate chrome shock springs
-Silver Shock Soxs
-Swaybar


Drivetrain and powerplant:
-Fuel filter
-Motorsaver air filter
-Maxxlite Cold Air Intake
-RRP Disc Brake Kit
-18 & 20 tooth clutch bells
-MIP Stinger Exhaust Kit
-MIP Clutch

Steering:
Hitec HS5945-MG Digtal Steering Servo
SuperMaxx Servo Saver Gen 1.5

Misc.:
-Knock-off Wheel Hubs
-Black Oxidized Hex screw kit
-MIP Temp Gauge
-NiMH 1200 MaH Rx Pack
-Primer removed from Gas Tank
-Braided Fuel Line (For Show only)
-Pro-line Brake Rotors (For Show only)

Wheels/Tires:
Stock
Pro-line Road Rage mounted on RPM Chrome StableMaxx Clawz
Pro-line Bow-Ties mounted on RPM Chrome StableMaxx Titans

Bodies:
-Stock
-Pro-line Urban Hummer
-Pro-line F-350
-Pro-line Peterbilt

Spare Parts:
-Full set of Ballistic Stupidity Skidplates
-Stock skidplates
-Stock brake parts
-Center Traxxas Skidplate
-Pullstart
-Spur Gear (70 & 72 tooth)
-Stock A-Arms, hinge pins and turnbuckles
-Stock muffler
-Stock shock towers
-Stock shocks ( with 45 Wt. oil and Green RPM 2-Stage shock pistons) and springs
-Standard Rate R/C Raven chrome springs
-Stock Air Filter
-Fuel line
-EZ Start gears (highly recommend if using the EZ-Start still!)
-Wheel hex adapters and axle pins (highly recommend if using knock off hubs)


I have attached an OLD pic of my T in its Low-rider config.

For more old pics (I need a digi cam!) go here:

http://www3.telus.net/T-Bo/

Gonna make a T-Maxx Zagi Airplane launcher one of these days!