graham_mca
Dec 14, 2004, 12:41 PM
New from the 'Stuff in Bags' range at McAllister Designs...
These are items designed and distributed by GMD
Trade enquiries are welcomed
Laser cut motor mounts. The motor mounts are somewhat larger than those from some other makers and are laser marked with cutting guide lines to make accurate trimming easy for you.
For example....
Square motor mounts for '400' or '480' size motors with mounting hole spacing of 5/8" (16mm). Laser cut from 1/16 Birch plywood.
Outside dimension is 1 5/8" (41mm)
with trim guide lines for 1 13/32" (36mm)
and 1 5/16" (30mm)
Bag of 2 mounts $3... pictured below
Similar round and square mounts are available for SPEED 500/600 and round mounts for 400/480
Also 1/16" birch ply control horns, 4 in a bag for $2.00
Postage is cheap, I do not have a minimum charge so two packets of these will cost 50 cents S&H.
I take PayPal through the web site
Full details at http://www.mcallisterdesigns.com/stuff1.htm
Thanks for looking,
Graham
These are items designed and distributed by GMD
Trade enquiries are welcomed
Laser cut motor mounts. The motor mounts are somewhat larger than those from some other makers and are laser marked with cutting guide lines to make accurate trimming easy for you.
For example....
Square motor mounts for '400' or '480' size motors with mounting hole spacing of 5/8" (16mm). Laser cut from 1/16 Birch plywood.
Outside dimension is 1 5/8" (41mm)
with trim guide lines for 1 13/32" (36mm)
and 1 5/16" (30mm)
Bag of 2 mounts $3... pictured below
Similar round and square mounts are available for SPEED 500/600 and round mounts for 400/480
Also 1/16" birch ply control horns, 4 in a bag for $2.00
Postage is cheap, I do not have a minimum charge so two packets of these will cost 50 cents S&H.
I take PayPal through the web site
Full details at http://www.mcallisterdesigns.com/stuff1.htm
Thanks for looking,
Graham