cayuse
Dec 09, 2004, 12:30 AM
delta-V Flight Technologies is proud to present the 3DZ-LX...
an all-balsa laser cut 3D aerobatic fun flyer for IPS and CDROM power.
Here are the specs:
Wingspan - 26"
Length - 22"
Wing area - 200 sq.in.
AUW - 6oz
Wing loading - 4.3oz/sq.ft.
Battery - Kokam 3S1P 340mAh
ESC - 5A
Servos - 3 x Pico (eg. GWS Pico, Hitec HS-55)
Rx - 4 channel micro (eg GWS Pico)
Motor/prop options
1. GWS IPS DX-C with GWS 11x7HD
2. GWS IPS DX-A with APC 9x3.8SF
3. GWS IPSD-RXC-A with GWS 10x4.7SF
4. CDROM Brushless with GWS 8x4HD
The comprehensive kit contains:
laser-cut balsa
laser cut 1/32” plywood (horns, etc)
basswood motor mount
carbon tail bearing and wing spar
plastic canopy material
tail skid / pushrod / landing gear wire
ultralight wheels and landing gear hardware
photo-illustrated instruction manual
You supply:
radio/motor/battery
covering material (Solite, Litefilm, etc.)
The IPS motor/prop combinations are configured to deliver the most static thrust while limiting the motor current to <2.5A on a 3-cell lithium polymer battery pack. So, your IPS motors will last as long as ever and won't become another "consumable" item. The lightweight CDROM combo gives the best power/weight. All combinations deliver ample hovering thrust with dependable reserve.
Video is coming soon. For now, check out this video of the foam version to see what the design is capable of .
3DZ movie (http://gvillette.rchompage.com/3dz.wmv)
Download the instruction manual here:
3DZ-LX Instruction Manual (http://gvillette.rchompage.com/3DZ-LX-Instructions.pdf)
Kits are available immediately at dVflighttech.com (http://www.dVflighttech.com)
$34.95 +S&H
Get hovering!
Gary
an all-balsa laser cut 3D aerobatic fun flyer for IPS and CDROM power.
Here are the specs:
Wingspan - 26"
Length - 22"
Wing area - 200 sq.in.
AUW - 6oz
Wing loading - 4.3oz/sq.ft.
Battery - Kokam 3S1P 340mAh
ESC - 5A
Servos - 3 x Pico (eg. GWS Pico, Hitec HS-55)
Rx - 4 channel micro (eg GWS Pico)
Motor/prop options
1. GWS IPS DX-C with GWS 11x7HD
2. GWS IPS DX-A with APC 9x3.8SF
3. GWS IPSD-RXC-A with GWS 10x4.7SF
4. CDROM Brushless with GWS 8x4HD
The comprehensive kit contains:
laser-cut balsa
laser cut 1/32” plywood (horns, etc)
basswood motor mount
carbon tail bearing and wing spar
plastic canopy material
tail skid / pushrod / landing gear wire
ultralight wheels and landing gear hardware
photo-illustrated instruction manual
You supply:
radio/motor/battery
covering material (Solite, Litefilm, etc.)
The IPS motor/prop combinations are configured to deliver the most static thrust while limiting the motor current to <2.5A on a 3-cell lithium polymer battery pack. So, your IPS motors will last as long as ever and won't become another "consumable" item. The lightweight CDROM combo gives the best power/weight. All combinations deliver ample hovering thrust with dependable reserve.
Video is coming soon. For now, check out this video of the foam version to see what the design is capable of .
3DZ movie (http://gvillette.rchompage.com/3dz.wmv)
Download the instruction manual here:
3DZ-LX Instruction Manual (http://gvillette.rchompage.com/3DZ-LX-Instructions.pdf)
Kits are available immediately at dVflighttech.com (http://www.dVflighttech.com)
$34.95 +S&H
Get hovering!
Gary