USB simulator cable

[Airborne 2007]

Where can a find a simulator cable for the GWS 4AII Transmitter with a USB end on it? I found one here, but it has the old style connector. Thanks.

http://www.gws-online.com/products.php?mc=Smart%20Tools&sc=Simulator&dtl=FSM-A&offset=0&pid=FSM-A

[Basketcase]

http://www.milehighwings.com/usb_cables.htm

http://www.tti-us.com/shop/index.php?cPath=24&osCsid=605ffdbd5b745aaf0e651b4a4f05a315

http://stores.ebay.com/Toms-RC-Simulator

[Airborne 2007]

Thanks. $50 bucks is a little more than i want to spend though. Has anyone tried the one at the link i posted? $5 almost sounds to cheap now.

-John

[PlagueWulf II]

Yes I have the one you (Airborne 2007) linked too, and the GWS 4aII transmitter, and it works good with FMS. But if you use win xp you need a tiny driver to make it work - let me know if you need it and I will give the link.

[Matt D.]

Yes, what is the link for Windows XP?
Thanks,
Matt

[Fred Bronk]

Over to SIMs.

FB

[Airborne 2007]

Yep. I probably need the driver too.

[qquattro]

http://quattro.haje.cz/view.php?cisloclanku=2004110102

[PHaze]

Quattro, how can I get one of your adapters?

[qquattro]

Quattro, how can I get one of your adapters?
please send me e-mail to address quattro@haje.cz

[ignacj]

I have purchased and sucessfully used gameport TX cable ($20) from Milehighwing. It is working as advertised and they also carry USB version.

On the bad side their service is questionable. I misplaced CD that came along and they would not provide me with instructions/driver without a proof of purchase. Turns out that there is no driver and setting up cable is simple matter of adding generic 4-axis yoke device under Control Panel.

Their response was very rude and I'm considering posting entire conversation in this group as a heads up for potential buyers.

thanks

[flyboy2610]

I have purchased and sucessfully used gameport TX cable ($20) from Milehighwing. It is working as advertised and they also carry USB version.

On the bad side their service is questionable. I misplaced CD that came along and they would not provide me with instructions/driver without a proof of purchase. Turns out that there is no driver and setting up cable is simple matter of adding generic 4-axis yoke device under Control Panel.

Their response was very rude and I'm considering posting entire conversation in this group as a heads up for potential buyers.

thanks

He did.
http://www.rcgroups.com/forums/showthread.php?t=312806

[pitts]

He did.
http://www.rcgroups.com/forums/showthread.php?t=312806
And notice the responce he got there!!!!!!
ignacj, As said on that thread, "get over it"... :D