servo saver help

[Anthony B.]

I replaced the factory Tmaxx steering servo with a HiTec 645MG servo. I
need a new servo saver but do not want the Kimbrough saver(went thru 3 on my
old tmaxx). Are there any other servo savers that fit this servo?
Anthony
www.mostlyrockets.com

[Rick Russell]

General Silicones makes some. Their web site is buggy as all heck, but
this link might work:

http://www.gsracing.com/gsracing/page.asp?pg=products&catid=100&fatherid=66&rootid=56

Rick R.

[Robert Gross]

If you are willing to spend a few bucks, you could try the proline steering
kit for the max. It has a bellcrank with integrated servo saver (1/8 scale
buggy style). I used to use it on my max and I loved it becuase you could
adjust tension with a quick turn of the knarled wheel. Check it out.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDCW6&P=ML

Robert


"Anthony B." <antb013@NOSPAMcomcast.net> wrote in message
news:FfOdnRBlksANTePcRVn-oQ@comcast.com...
> I replaced the factory Tmaxx steering servo with a HiTec 645MG servo. I
> need a new servo saver but do not want the Kimbrough saver(went thru 3 on
my
> old tmaxx). Are there any other servo savers that fit this servo?
> Anthony
> www.mostlyrockets.com
>
>

[Anthony B.]

That's a niece piece. I did, however, get an OFNA servo saver.
thanks
Anthony
"Robert Gross" <rgross98@optonline.net> wrote in message
news:jIXfd.64$UC4.39853@news4.srv.hcvlny.cv.net...
> If you are willing to spend a few bucks, you could try the proline
> steering
> kit for the max. It has a bellcrank with integrated servo saver (1/8
> scale
> buggy style). I used to use it on my max and I loved it becuase you could
> adjust tension with a quick turn of the knarled wheel. Check it out.
>
> http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDCW6&P=ML
>
> Robert
>
>
> "Anthony B." <antb013@NOSPAMcomcast.net> wrote in message
> news:FfOdnRBlksANTePcRVn-oQ@comcast.com...
>> I replaced the factory Tmaxx steering servo with a HiTec 645MG servo. I
>> need a new servo saver but do not want the Kimbrough saver(went thru 3 on
> my
>> old tmaxx). Are there any other servo savers that fit this servo?
>> Anthony
>> www.mostlyrockets.com
>>
>>
>
>