Logo 10 Scale Bodies?

[helimatt]

I just now saw that they created a scale heli forum here. Cool.

Anyone ever come across a Logo 10 scale body, or a scale body that would fit a Logo 10?

I have yet to see one . . .

Thanks in advance.

[Geoffrey109]

What Scale is the Lago 10 in.......cus I seen a really cool Huey Gunship in 1/18 scale at walmarts today, to big for my Micro, but....depending on your scale, it looked pretty cool for a scale body anyway......

G.

[Geoffrey109]

What Scale is the Lago 10 in.......cus I seen a really cool Huey Gunship in 1/18 scale at walmarts today, to big for my Micro, but....depending on your scale, it looked pretty cool for a scale body anyway......

G.

[helimatt]

Depends on what you are trying to model. The logo has about a ~1m span. So that would make it somewhere between 1/10 and 1/12 scale I suppose.

I am not too interested in a body not indended for electric r/c heli use. I think using a toy or a heavy glass fuse for glow RC use would be too much weight. Regardless, thanks for the suggestion.

[darthdrk]

Dont know if any of the Darth fuses will work, I will need some detailed specs on the Logo 10. I would need to know the distance from the mainshaft to the Tailrotor Hub. From the swashplate to the bottom of the frame. from the mainshaft to the front most part of the Heli. Also need to know the width. Good to know the distance between the top and bottom of the landing gear. I may have a few things that may work.

[helimatt]

It has been a few days since I could gather these dimensions. . .

I would need to know the distance from the mainshaft to the Tailrotor Hub.

From CL of Main Shaft to CL of Tail Rotor Shaft is approx 25-7/8"


From the swashplate to the bottom of the frame.

Bottom of swash to bottom of frame ~6" (0 deg pitch). Full down pitch is about 5-1/2"


from the mainshaft to the front most part of the Heli.

CL of Main Shaft to Front (of battery pack) 9" min. 9-1/8" to 9-1/4" would provide some extra play.


Also need to know the width.

Width is 3-3/4" (widest part is the spur gear)


Good to know the distance between the top and bottom of the landing gear.

Landing Gear is 2-7/8" tall, and 8-1/8" wide (at the bottom / widest part).

Let me know if you have something that works.

As an aside, I love your As365 Dauphin. My Piccolo will get that fuse this winter (that is the plan, at least). Is it possible to fit retracts?

Thanks!

[Robert Stinson]

Hey, Darthdrk, any progress on a Hughes300 for the Logo-10? I know you're busy with micros, but I got a heli if you got a canopy...PETG of course!

[darthdrk]

I would think the LMH Hughes 300 would fit on the Logo 10. It fits on the Eco 8 which is in the same class as the Logo 10.

[darthdrk]

Hey Rob, Nice Avatar

[King Kong]

the logo is bigger than the eco and corona

[darthdrk]

I have an Eco 8 here and looking at the measurements of the LOGO 10 at the top, there isnt too much difference that would prevent a Hughes 300 from working.

[Steph280]

Century's 30 size fuses will fit the Logo 10 if you stretch the tailboom.

[Michael Logan]

Aero-model.com has a scale Jet Ranger specifically designed for the logo 10