John Likakis
Jul 08, 2004, 10:11 PM
This message from "John Likakis" <blurunnr@sover.net> brought to you by EFLIGHT!
I believe the Kokam 700 is rated to 6C--at least according to the FMA site.
I have a 2S and a 3S 700 pack, though I've yet to build something they can
fly in.
JL
----------
>From: "Shell M. Shrader" <shell@shellware.com>
>To: <eflight@ezonemag.com>
>Subject: [EFLT] LiPo and HL Rare Bear Question
>Date: Thu, Jul 8, 2004, 10:05 PM
>
> This message from "Shell M. Shrader" <shell@shellware.com> brought to you
> by EFLIGHT!
>
> I finally gave up trying to run my Rare Bear with the 9v look alike 7.4v
> nicads that HL recommends. I ended buying a 2 cell Kokam 700mAh pack but
> after doing a little math am a little concerned over the possibility of
> blowing my little foamie bear outta the sky because of excessive draw on the
pack.
>
> I'm using the stock setup which I believe should only draw 2 amps and puts
> me right under the 3C mark. Any thoughts/concerns? Should I add the extra
> weight and do a 2s2p instead of 2s1p?
>
> Any feedback is greatly appreciated!
> Shell
>
>
*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm
I believe the Kokam 700 is rated to 6C--at least according to the FMA site.
I have a 2S and a 3S 700 pack, though I've yet to build something they can
fly in.
JL
----------
>From: "Shell M. Shrader" <shell@shellware.com>
>To: <eflight@ezonemag.com>
>Subject: [EFLT] LiPo and HL Rare Bear Question
>Date: Thu, Jul 8, 2004, 10:05 PM
>
> This message from "Shell M. Shrader" <shell@shellware.com> brought to you
> by EFLIGHT!
>
> I finally gave up trying to run my Rare Bear with the 9v look alike 7.4v
> nicads that HL recommends. I ended buying a 2 cell Kokam 700mAh pack but
> after doing a little math am a little concerned over the possibility of
> blowing my little foamie bear outta the sky because of excessive draw on the
pack.
>
> I'm using the stock setup which I believe should only draw 2 amps and puts
> me right under the 3C mark. Any thoughts/concerns? Should I add the extra
> weight and do a 2s2p instead of 2s1p?
>
> Any feedback is greatly appreciated!
> Shell
>
>
*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm