PDA

View Full Version : Thats one bent buggy...

Dan405
Jul 07, 2004, 09:11 PM
There was a Pug 205 GT dumped on the grass in the capark where we
run our RC's. We put a ramp up and started jumping it (video's up tmrw
;) ). One of my mates set the ramp too close, and hit the corner of the
roof/door...

http://www.danontherun.com/bentcar1.jpg
http://www.danontherun.com/bentcar2.jpg

That was a Thunder Tiger EB4 Pro. Tmrw the anvil and large hammer will be
utilised!

--
Dan
Dean
Jul 07, 2004, 09:11 PM
On Thu, 8 Jul 2004 00:37:28 +0100, "Dan405"
<dan405@SdanPontAherMun.com> wrote:

>There was a Pug 205 GT dumped on the grass in the capark where we
>run our RC's. We put a ramp up and started jumping it (video's up tmrw
>;) ). One of my mates set the ramp too close, and hit the corner of the
>roof/door...
>
>http://www.danontherun.com/bentcar1.jpg
>http://www.danontherun.com/bentcar2.jpg
>
>That was a Thunder Tiger EB4 Pro. Tmrw the anvil and large hammer will be
>utilised!

Wow nice job! I bet it handled real funny, that is if it didn't throw
the driveshafts.
---
Proud owner of:
Associated RC10GT <the other basher>
Team Losi XX "CR" <the basher>
Team Losi XXX KE <the racer>
http://ripperd.com
email: dean (at) the above domain
Dan405
Jul 07, 2004, 09:11 PM
"Dean" <look@sig> wrote in message
news:9g2pe05od3i443omkff16p3a6msuj8dmrb@4ax.com...
> On Thu, 8 Jul 2004 00:37:28 +0100, "Dan405"
> <dan405@SdanPontAherMun.com> wrote:
>
> >There was a Pug 205 GT dumped on the grass in the capark where we
> >run our RC's. We put a ramp up and started jumping it (video's up tmrw
> >;) ). One of my mates set the ramp too close, and hit the corner of the
> >roof/door...
> >
> >http://www.danontherun.com/bentcar1.jpg
> >http://www.danontherun.com/bentcar2.jpg
> >
> >That was a Thunder Tiger EB4 Pro. Tmrw the anvil and large hammer will
be
> >utilised!
>
> Wow nice job! I bet it handled real funny, that is if it didn't throw
> the driveshafts.
> ---

Heh yea :) Threw the back driveshaft out, and the engine moved quite a way,
so the clutch bell wasn't contacting the spur gear properly :) Still, it'll
be fine by tmrw night ;) When we go back to do it again :D

--
Dan