Dynaflite Skeeter dihedral angles

[John Gallagher]

I'm repairing my old Skeeter wing but lost the instruction manual in a move a while back. I need to know how high the center panel should be raised to get the correct dihedral. Also how high the the tip should be raised to get the poly angle.

Also, anyone have a Skeeter instruction manual they don't want or could copy?

thanks,
John

[bfretless]

Hi, John! I've got Skeeter instructions and plans here. With a center panel flat on the board, the other center panel should be 3 inches off the board, and the poly tip 2.75 inches up.

As soon as I can get to a copier I'll copy the instructions for you. It's only five pages. PM me your street address for mailing.

--
Bill

[John Gallagher]

Bill,
My Skeeter instructions were a booklet about 6" by 8". I'm sure they were a lot more than five pages. Are your instructions very old? Mine were about 4 or 5 years old.

John

[bfretless]

John,

Yes, the booklet is made up of folded 8.5 x 11" paper, so it's 5.5 x 8.5" and consists of 8 of these half-sized pages. In other words, it's two full sheets, printed both sides and folded in half. I can copy them, without removing the center staples, on five sheets of paper. If I removed the staples and copied double-sided, it would take only two.

Don't worry, they are the real, original instructions.